Bedienungsanleitung Fujitsu LifeBook S7010 (Seite 112 von 128) (Englisch)

574838

112

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

102

LifeBook S7000 Notebook

Connection using Atheros Client Utility

FLOW OF OPERATIONS

The wireless LAN connection procedure is outlined

below.

1. Make sure that the personal computer is ready for

the transmission of radio waves from the wireless

LAN. For further details, see “Starting the trans-

mission” on page 96.

2. Assign the parameters required for wireless LAN

connection. For further details, see “Preparation

for wireless LAN connection” on page 97.

■

Enter the network name (SSID) and other data.

■

Enter the network key (the key to be used to

encode communications data).

3. Perform setting operations relating to network con-

nection. For further details, see “Connection to the

network” on page 99.

■

Specify TCP/IP as the protocol, and confirm the

name of the work group and other settings.

■

Enter the data required for file/printer sharing on

the network. Perform this operation as required.

■

For access point (infrastructure) connection,

enter data for the access point. Refer to the

manual of the access point for further details.

■

Verify that you have been able to connect your

computer to the network.

PREPARATION FOR WIRELESS LAN

CONNECTION

This section explains the preparation (parameter assign-

ment) required for the use of the wireless LAN.

Assigning parameters

Enter the network name (SSID), the network key, and

other data required for wireless LAN connection. If there

is the administrator of the network, contact the network

administrator for data settings.

1. Right-click the Atheros Wireless Utility icon in the

system tray in the lower right corner of your screen.

2. Click [Open Client Utility]. The [Atheros Client

Utility] window will be displayed.

3. Select the [Profile Management] tab.

4. Click the [New] button. The Profile Management

window will appear.

5. Enter the following information required to estab-

lish connection to the wireless LAN:

Profile Name

Enter a name for this configuration profile

Network names

Enter the appropriate SSID(s) of the wireless net-

works to which this device will connect. You have

the option of entering up to three SSID’s.

6. Select the [Advanced] tab.

7. Choose appropriate Power Save Mode setting.

Options are [Off], [Normal], and [Maximum].

[Normal] is the default setting.

8. Choose the appropriate type of network connec-

tion. Options are [Access Point] (same as infra-

structure mode) and [AdHoc].

9. Select the [Security] tab.

■

To use access point (infrastructure) con-

nection, refer to the access point manual

for the access point-setting procedure.

■

You do not need to set the channel

when using access point (infrastructure)

mode. Channel selection is controlled by

the access point. In ad hoc networks,

channel selection defaults to channel 11;

however, channel selection can be man-

ually changed if desired. This can be

accomplished only when using the client

utility.

If it is necessary to change the channel,

change the setting of the access point.

For the setting procedure, refer to the

manual of the access point.

S Series.book Page 102 Thursday, February 19, 2004 4:52 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujitsu LifeBook S7010 Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info