Bedienungsanleitung Fujitsu LifeBook S7010 (Seite 115 von 128) (Englisch)

574838

115

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

105

WIreless LAN User’s Guide

Confirming connection

After you have finished the network setup operations,

access the folder whose sharing has been set, and

confirm the status of the radio in case of trouble such as

a network connection failure.

In the case of an access point (infrastructure) connec-

tion, enter the necessary data for the access point before

confirming connection. Refer to the manual of the access

point for the access point setup procedure

Connecting your personal computer to another

personal computer

1. Double-click [My Network Places] on the Desktop.

The [My Network Places] window will be dis-

played.

2. Double-click the [Computers Near Me] icon. The

personal computers connected to the network will

be listed.

3. Double-click the name of the personal computer to

which you wish to connect your own personal com-

puter. The folder that specified in “Setting the file-

sharing function” on page 100 will be displayed.

4. Double-click the folder to be accessed. The contents

of the folder will be displayed.

Confirming the radio status

1. Right-click the Atheros Wireless icon in the lower

right corner of the screen.

2. Click [Open Client Utility]. The Atheros Client

Utility window opens.

3. On the Current Status tab, you will find the current

operating status of the radio. (When the radio is

turned off or the computer is not yet connected,

some of the conditions will not be displayed.)

■

Profile Name

The current configuration profile is displayed.

■

Network Type - Configured Network Type

[Access Point] or [AdHoc] will be displayed.

■

Current Mode

Indicates the frequency and data rate currently

used by the radio.

■

Current Channel

The channel number currently used by the radio.

■

Link Status

Displays the current connected state of the

WLAN module.

■

Encryption Type

Displays the encryption type currently used by

the radio.

■

IP Address

Displays the current TCP/IP address assigned to

the WLAN adapter.

On the Current Status tab, click the [Advanced] button.

The following information will be displayed.

■

Country

The country with the country code for which the

radio is configured.

■

Transmit Power Level

Displays the current transmit power level of the

radio.

■

Network Name (SSID)

Displays the Network Name (SSID) currently

used by the radio.

■

Power Save Mode

Displays the configured Power Save Mode

currently used by the radio. [Off], [Normal], or

[Maximum] will be displayed.

■

BSSID

Displays the Basic Service Set Identifier. This is

typically the MAC address of the Access Point or

in the case of AdHoc networks, is a randomly

generated MAC address.

■

Frequency

Displays the center frequency currently being

used by the radio.

■

Transmit Rate

Displays the current data rate used by the radio

to transmit data.

■

Receive Rate

Displays the current data rate used by the radio

to receive data.

S Series.book Page 105 Thursday, February 19, 2004 4:52 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujitsu LifeBook S7010 Seite 115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info