Bedienungsanleitung Fujitsu LifeBook S7010 (Seite 116 von 128) (Englisch)

574838

116

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

106

LifeBook S7000 Notebook

Other settings

SETTING OF POWER-SAVING FUNCTION

You can set the power-saving function of wireless LAN.

Default setting is auto-setting. In case of using the

power-saving function, manually control the communi-

cation performance.

Intel PROSet Wireless LAN:

1. Click [Start] -> [(All) Programs] -> [Intel Network

Adapters] -> [Intel(R) PROSet]. The Intel(R)

PROSet window will be displayed.

2. Click the [Adapter] tab.

3. Click the [Configure] button in [Power settings].

The [Power settings] window will be displayed.

4. Select [Manual], and adjust the bar to set the

power-saving function.

Setting of transmission power during ad hoc

connection

By controlling the transmission power during ad hoc

connection, you can broaden or narrow the communi-

cation range. This setting is only effective during ad hoc

connection. It will be ineffective during access point

connection.

Intel PROSet Wireless LAN:

1. Click [Start] -> [(All) Programs] -> [Intel Network

Adapters] -> [Intel(R) PROSet]. The Intel(R)

PROSet window will be displayed.

2. Click the [Adapter] tab.

3. Click the [Configure] button in [Power settings].

The [Power settings] window will be displayed.

4. Adjust the “Transmission Power (Ad Hoc)” bar to

set the transmission power.

Setting of channels during ad hoc connection

You can set channels during ad hoc connection. Channel

11 is set by default. When connecting to an existing ad

hoc network, no channel setting will be effective.

This setting is only effective during ad hoc connection; it

will be ineffective during access point connection.

Intel PROSet Wireless LAN:

1. Click [Start] -> [(All) Programs] -> [Intel Network

Adapters] -> [Intel(R) PROSet]. The Intel(R)

PROSet window will be displayed.

2. Click the [Adapter] tab.

3. Click the [Configure] button in [Ad hoc settings].

The [Ad hoc settings] window will be displayed.

4. Change channels during ad hoc connection by

selecting a new channel from the drop down list.

5. Click [OK].

Atheros Wireless LAN:

1. Click on the My Computer icon. Select [View sys-

tem information] from the left frame.

2. Select the Hardware tab and click [Device Man-

ager].

3. Double-click “Atheros BCM4306 Wireless LAN

Adapter” under [Network Adapters].

4. In the Atheros BCM4306 Wireless LAN Adapter

window, select the Advanced tab.

5. Select IBSS Channel Number from the list, and

change the value from the [Value:] dropdown list to

the desired channel.

6. Click [OK].

When changing channels during ad hoc

connection, change the channel settings of

all connected computers with the same

Network name (SSID) at the same time.

After changing the channels, turn off all

computers and -- after they are all turned

off -- turn them back on.

S Series.book Page 106 Thursday, February 19, 2004 4:52 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujitsu LifeBook S7010 Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info