Bedienungsanleitung Funai BH2-M200 (Seite 70 von 88) (Englisch)

503524

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Note

• The range of input numbers is between 0 and 255.

• If you enter a number larger than 255, the number will

automatically be 255.

• The manually entered addresses will be saved even if you

change the setting to “Auto(DHCP)”.

• If you want to enter 1 or 2 digit number in one cell, press [B]

to move on to the next cell.

• If the entered IP address or the default gateway or primary

DNS address is same as the default setting, IP address

setting will be set to “Auto(DHCP)”. (The manually entered

number will be saved.)

• When IP address setting is set to “Manual”, the setting of

DNS setting will automatically be “Manual” and when IP

address setting is set to “Auto(DHCP)”, you can set either

“Auto(DHCP)” or “Manual” for DNS setting.

Proxy Setting

1 Select “Manual”, then press [ENTER\OK].

2 Select “Proxy Setting”, then press [ENTER\OK].

• For default settings, select “Do Not Use”.

• If you need to change the proxy setting as instructed by

your Internet service provider to set the designated

proxy address and port, select “Use”.

• To delete letters, press [CLEAR] repeatedly. Press and

hold [CLEAR] to delete all letters.

3 Press [RETURN\BACK] to go back to the

previous screen, or press [SETUP] to exit.

Note

• The range of input numbers for the port number is between

0 and 65535. (If you enter a number larger than 65535, it will

be regarded as 65535.)

• For proxy port, certain ports might be closed, blocked or

unusable depending on your network environment.

Connection Speed

You can set connection speed as your preference.

(The default setting is “Auto”.)

1 Select “Manual”, then press [ENTER\OK].

2 Select “Connection Speed”, then press

[ENTER\OK].

3 Select the desired setting, then press

[ENTER\OK].

“Auto”:

Set the appropriate connection speed automatically, in

accordance with your network environment.

“10BASE Half”:

Set the connection speed to “10BASE Half”.

“10BASE Full”:

Set the connection speed to “10BASE Full”.

“100BASE Half”:

Set the connection speed to “100BASE Half”.

“100BASE Full”:

Set the connection speed to “100BASE Full”.

4 Press [RETURN\BACK] to go back to the

previous screen, or press [SETUP] to exit.

Note

• Choose a connection speed in accordance with your

network environment.

• The network connection may be disabled depending on the

device, when the settings are changed.

BD-Live Setting

You can limit Internet access for BD-Live™ discs.

(The default setting is “Allow”.)

1 Select “Manual”, then press [ENTER\OK].

2 Select “BD-Live Setting”, then press

[ENTER\OK].

3 Select the desired setting, then press

[ENTER\OK].

“Allow”:

Internet access is permitted for all BD-Live™ contents.

“Limited Allow”:

Internet access is permitted only for BD-Live™ contents

which have content owner certificates. Internet access

without the certificates is prohibited.

“Prohibit”:

Internet access is prohibited for all BD-Live™ contents.

4 Press [RETURN\BACK] to go back to the

previous screen, or press [SETUP] to exit.

Connection Test

Refer to “Connection Test” on page 69.

Deactivate all the network connection and settings.

1 Select “Disable”, then press [ENTER\OK].

Note

• The network connection can be reactivated by setting the

network connection to “Auto” or “Manual”.

If you select “Use”, follow the following instructions

to set the proxy address and proxy port.

2-a) Select “Proxy Address”, then press [ENTER\OK].

The keyboard screen will appear. Enter proxy

address using the [the Number buttons], then

press [ENTER\OK].

[Red] : Upper case letters and symbols

[Green] : Lower case letters and symbols

[Yellow] : Numbers

2-b) After you enter proxy address correctly, press

[ENTER\OK].

• Confirmation message will appear. Select “Yes” to

complete the settings.

2-c) Select “Proxy Port”, then press [ENTER\OK].

Proxy port setting screen will appear. Enter proxy

port number with number buttons.

2-d) After you enter proxy port correctly, press

[ENTER\OK].

Disable

'8'&A'0DQQM2CIG(TKFC[(GDTWCT[2/

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funai BH2-M200 Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info