Bedienungsanleitung Funai DPVR-4110 (Seite 12 von 28) (Englisch)

530568

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

12 EN

Time Search

This feature allows you to go to a specific point on a tape by

entering the exact amount of time you wish to skip in order to

reach the point.

If a tape includes both programmes recorded in the PAL

system and ones recorded in the NTSC system, this function

may not be operated correctly.

• Use the remote control for this procedure.

1) Press

VCR, then SEARCH twice.

2) Press

K or L repeatedly until the desired time appears.

3) Press

s or B to start Time Search.

•The unit begins rewinding or fast forwarding to the

specified point. When 0:00 is reached, the unit will start

playback automatically.

Note: • Time Search can be set up to 9 hours 59 minutes

(9:59).

• This function will not operate in the Recording mode.

• Operations must be followed up within 30 seconds

from steps 2) to 3), otherwise the Time Search mode

will be cancelled.

• To exit the Time Search mode, press SETUP in step 2)

or press STOP C after step 3).

Hi-Fi Stereo Sound System

This unit will record and playback Hi-Fi stereo sound. In

addition it has an A2 stereo sound decoder.

This equipment will receive stereo and bilingual broadcasts

and it is possible the several ways of recording and playing back

the sound.

Selecting the Sound Mode

You can select each mode by pressing AUDIO on the remote

control. Each mode is indicated on the TV screen as following.

• During reception of stereo broadcasts

• During reception of bilingual broadcasts

Note: • If you play non-Hi-Fi tapes, the unit will play

automatically in monaural even if you select any

mode.

• If the stereo signal becomes weak, the broadcast is

automatically recorded in monaural.

Recording

Viewing and Recording the Same Programme

1) Insert a cassette tape with its erase-prevention tab in place.

(If necessary, rewind or fast forward the tape to the point

at which you want to begin recording.) Press

VCR.

2) Press

the Number buttons or CHANNEL (K/L) to select

the channel to be recorded.

3) Press

SPEED/SYSTEM to select the tape speed (SP/LP).

4) Press

REC/OTR to begin recording.

•The REC indicator on the front panel display comes on.

5) Press

STOP C when recording is completed.

Two Different Tape Speeds

Before recording, select the tape speed: SP mode (Standard

Play) or LP mode (Long Play). The table below shows the

maximum recording/playback time using E-60, E-120, E-180

or E-240 tapes in each mode.

Skipping Unwanted Programme Material During

Recording

1) Press PAUSE F when you want to temporarily halt

recording.

You can check the remaining pause time with

marks on

the TV screen. Each

mark represents 1 minute. After 5

minutes, the unit will automatically switch to the Stop

mode to prevent tape damage.

2) Press

PAUSE F or REC/OTR to resume recording.

Recording One Programme While Viewing Another

You can record one programme while viewing another. To

start recording, follow steps 1) to 4) under “Viewing and

Recording the Same Programme”. Then, set the TV to the

channel you want to watch.

To Monitor the Progress of Your Recording

Select the video channel on the TV.

Assemble Function

You can record in continuation from previous programme on

a pre-recorded tape.

1) Insert a pre-recorded tape. Press

PLAY B to start playback.

2) Press

PAUSE F at the desired point on the tape.

3) Press REC/OTR. The unit will be in the Recording Pause

mode.

4) Press

CHANNEL (K/L) to select the channel to be

recorded.

5) Press

REC/OTR or PAUSE F. The recording will begin.

6) Press

STOP C when recording is completed.

OTR (One Touch Recording)

This function enables you to set the duration of a recording

simply by pressing

REC/OTR.

1) Follow steps

1) to 3) in “Viewing and Recording the Same

Programme”.

2) Press

REC/OTR repeatedly until the desired recording

length appears in the upper left corner of the TV screen.

Recording stops when 0:00 is reached.

• To check time remaining during an OTR, press

DISPLAY.

• To change the recording length during an OTR, press

REC/OTR repeatedly until the desired length appears.

• To stop an OTR before recording is finished, press

STOP C.

• To cancel the OTR but continue recording, press

REC/OTR

repeatedly until “I” appears without the recording length.

Mode Audio output

Display on

the TV screen

Stereo Stereo STEREO

L L audio from the both speakers LEFT

R R audio from the both speakers RIGHT

Normal Monaural - None -

Mode Audio output

Display on

the TV screen

Main Main audio from the both speakers MAIN

Sub Sub audio from the both speakers SUB

Main / Sub

• Main audio from the left speaker

• Sub audio from the right speaker

MAIN + SUB

Tape Type Recording/Playback Time

Tape Speed SP Mode LP Mode

E-60 1 hour 2 hours

E-120 2 hours 4 hours

E-180 3 hours 6 hours

E-240 4 hours 8 hours

I I [0:30] I[1:00]... I[7:30] I[8:00]

(Normal (OTR:

recording) 30 minutes)

E8G06ED(EN).fm Page 12 Friday, July 27, 2007 8:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funai DPVR-4110 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Funai DPVR-4110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info