Bedienungsanleitung Funai DPVR-4110 (Seite 13 von 28) (Englisch)

530568

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

13 EN

Timer Recording

You may programme the unit to start and end a recording

while you are away. You can set 8 programmes to record on

specific days, daily or weekly within a 1-year period.

• Use the remote control for this procedure.

• Insert a cassette tape with its erase-prevention tab in place.

(If necessary, rewind or fast forward the tape to the point at

which you want to begin recording.)

1) Press

VCR, then SETUP.

2) Press K or L to select “TIMER”, then press B.

Note: • If you have not set the clock yet, “CLOCK” setting

menu appears. If so, follow the steps outlined in the

“Setting the Clock”. (Refer to page 8.) Then, set the

timer.

•When you press

B after pressing K or L during steps 3) to

7), the input mode will move to the next item.

• If you do not press B within 5 seconds of setting an item,

the input mode will move to the next item.

•Press

s to go back to the previous item from the current

setting during steps 4) to 8). If s is pressed when the

TIMER NUMBER is flashing, the entire programme

contents will be erased.

3) Programme number flashes. Press

K or L repeatedly until

the desired programme number appears. Then, press

4) Select once, daily, everyday or weekly recording.

For once-only recording: Press K or L repeatedly until

the relevant month appears, and then press

K or L

repeatedly until your desired day appears.

For daily recording: To record a TV programme at the

same time on the same channel from Monday through

Friday. While the month digit is flashing, press

K or L

repeatedly to select “MO-FR”.

For everyday recording: To record a TV programme at

the same time on the same channel everyday. While the

month digit is flashing, press

K or L repeatedly to select

“MO-SU”.

For weekly recording: To record a TV programme at the

same time on the same channel every week. While the

month digit is flashing, press

K or L repeatedly to select

“W-MO” (example: every Monday).

5) Press

K or L repeatedly until the relevant start hour

appears. Next, enter the minute digit.

6) Press

K or L repeatedly until the relevant end hour

appears. Next, enter the minute digit.

7) Press

K or L repeatedly until the relevant channel number

appears.

8) Press

K or L repeatedly until the desired tape speed

appears.

9) Press

B. Programme is now completed.

•To set another timer programme, repeat steps

3) to 9).

10)Press

SETUP to exit.

11)Press

T-SET to activate a Timer Recording.

•If the unit switches to the DVD mode after pressing

T-SET, the indicator will not appear. The

indicator will appear when the unit is turned off by

pressing

STANDBY-ON.

•If the unit is turned off after pressing

T-SET, the

indicator will appear.

To Stop a Timer Programme Which Has Already

Started

Press STOP/EJECT on the unit.

Note: • STOP C on the remote control will not function in the

Timer Recording mode.

To Correct Timer Programmes

If the unit is already in timer standby mode, press

STOP/EJECT on the front panel or T-SET on the remote

control to exit from the standby mode.

1) Repeat steps 1) to 3) in the “Timer Recording”.

2) Select the setting you want to change using s or B.

3) Enter the correct numbers using

K or L, then press B.

4) Press

SETUP to exit.

5) Press T-SET to return to timer standby mode.

To Cancel or Check the Start/End Time

If the unit is already in timer standby mode, press

STOP/EJECT on the front panel or T-SET on the remote

control to exit from the standby mode.

1) Repeat steps 1) to 2) in the “Timer Recording”.

2) Select the programme number you want to check using K

L. The details of selected programme appears on the

TV screen. You may cancel the entire programme by

pressing

3) Press

SETUP to exit.

Avoid Overlap of TIMER Programmes...

A timer programme does not work while another programme

is under execution.

Hints for OTR and Timer Recording

•Press

VCR on the remote control before you set Timer

Recording. Make sure the unit is in the VCR mode, then

press T-SET.

• If a tape is not in the unit or does not have the erase-

prevention tab, the indicator flashes and Timer

Recording cannot be performed. Please insert a recordable

tape.

• When Timer Recordings are set, the indicator will

appear. To use the VCR as usual until the time for the

recording, press

T-SET so that the indicator disappears.

Select either VCR or DVD mode, then continue with the

other features as described in this manual.

After an OTR and a Timer Recording has been set,

this unit operates as follows:

• If a tape runs out before an OTR or a Timer Recording is

finished, the unit ejects the tape and switches to the DVD

mode automatically. If the DVD power is off, the unit does

not switch to the DVD mode but goes into the timer

standby mode. Press

T-SET on the remote control or

STOP/EJECT on the unit, then press VCR to activate the

VCR function again.

• Once the unit turns to the timer standby mode, no VCR

functions are available until

T-SET is pressed. (OUTPUT on

the front panel and

VCR on the remote control will not

function.)

• To cancel the timer standby mode, press T-SET on the

remote control or

STOP/EJECT on the unit, then press

VCR to activate the VCR function again.

•Press

VCR or DVD on the remote control to select your

desired mode before you operate.

TIMER

SET UP

INITIAL

TIMER NUMBER

START

END

DATE

CHANNEL

SPEED

--/--

--:--

9:00 10:00 11:00

Programme 1

Programme 2

Programme 3

E8G06ED(EN).fm Page 13 Friday, July 27, 2007 8:51 PM

Funai DPVR-4110 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Funai DPVR-4110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info