503756
7
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
7 EN
Connecting AV terminals
When you watch a programme recorded on an another source,
use the AUDIO/VIDEO input jacks on the back of the unit.
When you connect a VCR (another source) to this unit,
connect the audio and video output jacks of the VCR (another
source) to the AUDIO L/R and VIDEO input jacks of this
unit.
Note: The S-VIDEO input jack is also available.
The S-VIDEO jack is given priority over the VIDEO
jack.
For Better Sound (for DVD Features)
This connection is optional for better sound.
For clear digital sound quality, use the DIGITAL AUDIO
OUT (COAXIAL) jack for the connection to your digital
audio system.
If the audio format of the digital output does not match the
capabilities of your receiver, the receiver may produce a
strong, distorted sound or no sound at all.
Hints for connecting to a Dolby Digital
decoder or MPEG decoder
By connecting this unit to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Multi-channel Dolby
Digital surround sound as heard in the movie theatres.
A digital component with a built-in MPEG 2 or Dolby
Digital
TM
allows you to enjoy the surround sound while
producing the effect of being in a movie theatre or a
concert hall.
If output is Dolby Digital encoded audio, connect to a
Dolby Digital decoder, and set “DOLBY DIGITAL” to
“BITSTREAM” in the AUDIO menu. (Refer to page 24.)
If output is MPEG encoded audio, connect to a MPEG
decoder, and set “MPEG” to “BITSTREAM” in the
AUDIO menu. (Refer to page 24.)
Hints for connecting to an MD deck or DAT
deck
The audio source on a disc in a Dolby Digital Multi-
channel surround format cannot be recorded as digital
sound by an MD or DAT deck.
Unless connected to a Dolby Digital decoder, set “DOLBY
DIGITAL” to “PCM” in the AUDIO menu. Playing a
DVD using incorrect settings may generate noise
distortion, and damage the speakers. (Refer to page 24.)
Set “DOLBY DIGITAL” and “MPEG” to “PCM” in the
AUDIO menu for connecting to an MD deck or DAT
deck. (Refer to page 24.)
To the audio
output jacks
To the video
output jack
Audio/Video cables
(not supplied)
etc.
[Another source]
COAXIAL
Digital Audio
Input jack
Coaxial cable
(not supplied)
This unit
Dolby Digital decoder
or MPEG decoder etc.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
L4670EA(EN).fm Page 7 Tuesday, May 15, 2007 5:36 PM
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Funai LDD-B2006 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info