Bedienungsanleitung Funai WV20V6 (Seite 79 von 90) (Englisch, Spanisch)

576269

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

Recording Playing discs EditingGetting started

Changing the

Setup menu

VCR functions Others

Before you start

Connections

Español

xxxx

Others

Troubleshooting (cont’d)

Error message Cause Solution

Disc Error

--- Please eject the disc. ---

Playback feature may not be

available on this Disc.

• Unplayable disc is inserted in the

unit.

• The disc is upside down.

• Insert the standardized disc which

bear the marks on page 41.

• Insert the disc with the labeled side

facing up.

Region Error

--- Please eject the disc. ---

Playback is not authorized in

your region.

• The region of the DVD-Video disc

does not match the ones on the

unit.

• Insert the DVD-Video disc with

region codes 1 or ALL.

Parental Lock On

The current selected parental

level prohibits playback.

• The current selected parental

level in the Setup menu prohibits

playback.

• Check the “Parental Lock” setting

(pages 72-73).

Recording Error

This program is not allowed to

be recorded.

• The recording function encountered

the copy prohibited program.

• You cannot record copy prohibited

programs.

Recording Error

This program is not recordable

in +VR mode.

• You are trying to record the copy-

once program.

• You cannot record the copy-once

program.

Recording Error

Can not record on this disc.

• You are trying to record onto the

disc which is unrecordable, or the

disc status is unable to record.

• The disc is dirty.

• The disc is damaged.

• Insert the recordable disc, and ensure

the disc status satisfies the recording

requirements (pages 25-26).

•

Clean the disc with a cleaning cloth.

• Replace the disc.

Recording Error

This disc is protected and not

recordable.

• You are trying to record on to the

protected disc which is set in the

Disc Edit menu.

• Release the disc protect setting in

the Disc Edit menu (pages 36, 64).

Recording Error

Disc is full.

(No area for new recording)

• You are trying to record onto

the disc which has no space for

recording.

• Insert the recordable disc with

enough recording space.

Symptom Remedy

“Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing,

formatting or editing (even after “Wait for a moment.” message is

disappeared), a Repairing process will begin automatically just after

turning the unit on again.

It may take several minutes up to about several hours.

• If you intend to cancel the Repairing process, press

[OPEN/CLOSE A] on the front panel, then select “Yes” with

[{ / B] and press [OK]. After that, the disc tray will automatically

open. In case the Repairing process is canceled, the disc MAY

NOT work.

Repairing

In a case you intend to cancel the

Repairing process.

Repairing

Do you want to cancel a repairing process ?

When selecting “Yes”, the disc may not be

usable.

Yes No

Picture noise appears. • Head cleaning for VCR may be necessary. Refer to “AUTO HEAD

CLEANING” (page 5).

• Adjust tracking control for better picture by pressing

[CHANNEL L / K] on the front panel or [CH K / L] while you are

playing a videotape.

The tape does not play. • No videotape is inserted.

Recording does not start immediately

after you press [VCR REC].

• Make sure the videotape has a record tab when you record to a

videotape. If needed, cover the hole with cellophane tape.

The remote control does not

function.

• Check if a videotape is in this unit.

The motor rotates even when

playback / recording is stopped.

• The motor may rotate for the duration of approximately 5 minutes

for efficient operation. This is not a malfunction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funai WV20V6 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info