Bedienungsanleitung Funkwerk CS410 (Seite 37 von 103) (Englisch)

68173

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

Sending/Receiving of SMS messages is only possible:

When you use this telephone with a system telephony pabx system that supports the SMS feature.

When you have registered this feature at your network service provider, or the provider of the

SMS center for your ISDN connection.

When the phone number for the SMS centeris stored in the telephone.

Consult the provider of the SMS center that has been configured to establish in which networks (fixed-line or mobile

communication network) SMS messages can be sent and the costs for sending and receiving SMS messages. This

telephone does not support the transmission of SMS messages with special content (for example images, audio).

The telephone stores all SMS messages you have received or sent in two separate lists. Up to 10 sent and 10 received

SMS messages can be stored. You can save a maximum of 5 linked SMS (regardless of whether they are double or

quadruple linked). Phones that do not support linked SMSs receive these as individual SMSS messages.

Please not that free storage space must be available to receive SMS messages. You can not receive any further SMS

text messages if you already have 10 SMS messages stored.

SMS messages you have sent can be stored in a list. When this list is full the SMS that was sent last is stored

temporarily.

UUS1 text messages

You can send text messages from one telephone to another without having to call that particular subscriber. UUS1

text messages are limited to 31 characters.

Information:

UUS1text messagescanalso be sent to internal and externaltelephones. You can onlyuse this feature with external

telephones if »UUS1 (User to User Signaling)« has been applied for (and approved) for your ISDN connection.

Notethat all terminaldevicesthat are used(telephones,pabx systems) must support thefeature »UUS1 (UsertoUser

Signaling)«.

The telephone stores all UUS1 messages you have received or sent in two separate lists. Up to 10 received an 10 sent

UUS1 messages can be stored.

Please not that free storage space must be available to receive UUS1 text messages. You can not receive any further

UUS1 text messages if you already have 10 UUUS1 messages stored.

UUS1 messages you have sent can be stored in a list. When this list is full the UUS1 text message that was sent last is

stored temporarily.

Creating and sending text messages Creating and sending text messages

You can send a text message to a number stored in your telephone (telephone directory, VIP memory or direct

dialing memory), or input a new number for sending. To do this, pressthe corresponding softkey in the menu »Send

mail»Tel. drctry«, »direct«, »VIP«, »New« or »Redialing«.

To select a number assigned to a function key (»direct«) or stored under the redial button, you can also press that

corresponding key.

Information:

Whensendingtextmessagesthefirstnumber(»MSN-1«)enteredinthetelephoneorthenumberspecifiedbymeans

of the userecall flash button are transmitted with the message.

Begin as follows:

>sss

Message SMS or UUS Send mail

SMS and UUS1 text messages Telephone operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funkwerk CS410 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info