Bedienungsanleitung Funkwerk CS410 (Seite 38 von 103) (Englisch)

68173

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

Example: Creating a UUS1 text message

Enter the text.

In this example: »Meeting 9. 30 to 11. 00 George«.

Confirm your entry with OK.

Send mail

UUS>Meeting 9. 30 a. m.

to 11. 00 a. m. George_

¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬

s Pressthecorresponding softkey to select a number stored in your

telephone,or press »New«toenter a newphone number. FOR EX

AMPLE.: »New«.

Send mail/UUS

Repeat

Tel. drctry

New

VIP

direct

Enter the telephone number.

FOR EXAMPLE.: »2200«.

Confirm your entry with OK. The text message is transferred to

the defined recipient.

Define targt. numb

>2200_

¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬

s Finally, you can store the text message in the appropriate list

(»ok« softkey) or keep it in the temporary memory (»No«

softkey).

Save memo?

¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬

Important notes for entering numbers with SMS transmission

If the »Direct exchange line access« feature is switched off for your telephone, then you must enter the line access

digit before the target number. The line access digit must be stored in the telephone.

When the telephone is connected to a pabx for which direct exchange line acces has been programmed, the you can

dial the target number directly.

Sending an interlaced SMS

You can link up to 4 SMS together. A counter in the display indicates the remaining space available for characters. At

the end of the first mail a query is made asking whether alinked mail is to be sent. If you replay with Yes, a message is

then shown indicating the remaining free space; if you answer with No, the input of the last character is ignored and

the SMS is sent as described for non-linked SMSs.

In the example shown here » 451 available« indicates the re

maining space for characters still available, 1/2 denotes that 1 is

the first SMS block, of 2. You can move between the blocks using

the arrow key. If no space is available for saving a linked SMS, the

message will only be stored temporarily.

Send mail

451 free 1/2 (Abc)

You can link up to 4

SMS messages

together. A counter

in the display space

indicates the remaining

available for character

Viewing newly received text messages

A new message can be displayed from the caller list (see page 29) or from the received text messages list. Once you

have read a message from the list of temporarily stored text messages, it is deleted from the caller list.

Viewing received or sent text messages

The following features are available when viewing temporarily stored text messages:

Resending a text message.

You can edit a text message before actually resending it.

Deleting a text message.

Entering the number, to which the text messagewas sent or from which it was received into the

telephones directory.

Telephone operation SMS and UUS1 text messages

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funkwerk CS410 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info