Bedienungsanleitung Fusion Apollo MS-SRX400 (Seite 10 von 12) (Englisch)

691368

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

download the app and update the device software, go to the

Apple App Store or the Google Play store.

True-Marine

™

Products

True-Marine products are subjected to rigorous environmental

testing under harsh marine conditions to surpass industry

guidelines for marine products.

Any product that bears the True-Marine stamp of assurance has

been designed for simplicity of use and combines advanced

marine technologies to deliver an industry leading entertainment

experience. All True-Marine products are supported by the

FUSION 3-year worldwide limited consumer warranty.

Specifications

General

Weight 340 g (12.0 oz.)

Water resistance IEC 60529 IPX7 (front of stereo only,

when properly installed)

Operating temperature range From 0 to 50°C (from 32 to 122°F)

Storage temperature range From -20 to 70°C (from -4 to 158°F)

Input voltage From 10.8 to 16 Vdc

Current (max.) 8 A

Current (muted) Less than 400 mA

Current (off, standby mode

enabled)

50 mA

Current (off, standby mode

disabled)

5 mA

Fuse 15 A blade type

Wi‑Fi wireless range Up to 32 m (105 ft.)

Bluetooth wireless range Up to 10 m (30 ft.)

Wireless frequencies/protocols Wi‑Fi 2.4 GHz @ 15 dBm nominal

Bluetooth 2.4 GHz @ 10 dBm nominal

Compass-safe distance 10 cm (3.9 in.)

On-board, Class D Amplifier

Output music power per

channel

70 W max. x 2 at 2 ohm per channel

Total output peak power 140 W max.

Output power per channel 2 x 43 W RMS at 14.4 Vdc input, 2 ohm,

10% THD*

2 x 26 W RMS at 14.4 Vdc input, 4 ohm,

10% THD*

*The stereo may limit the output power to prevent the amplifier

from overheating, and to maintain the audio dynamics.

Tuner Europe and

Australasia

USA Japan

FM radio

frequency range

87.5 to 108 MHz 87.5 to

107.9 MHz

76 to 95 MHz

FM frequency

step

50 kHz 200 kHz 50 kHz

AM radio

frequency range

522 to 1620 kHz 530 to

1710 kHz

522 to

1620 kHz

AM frequency

step

9 kHz 10 kHz 9 kHz

Troubleshooting

The stereo does not respond to key presses

• Press and hold for at least 10 seconds to reset the stereo.

My Bluetooth audio is interrupted by short breaks

• Ensure the media player is not covered or obstructed.

Bluetooth technology performs best with line-of-sight

operation.

• Bring the media player within 10 m (33 ft.) of the stereo.

• Turn off the DISCOVERABLE setting after pairing a

Bluetooth device to the stereo.

The stereo does not display all song information from

my Bluetooth source

The availability of song information such as song title, artist

name, track duration, and album cover artwork depends on the

capability of the media player and music application.

Network Troubleshooting

If you cannot see or connect to FUSION PartyBus devices on

the network, check the following:

• Verify that only one device, either a stereo or a router, is

configured as a DHCP server.

• Verify that all FUSION PartyBus devices, network switches,

routers, and wireless access points are connected to the

network and turned on.

• Verify that wireless FUSION PartyBus devices are connected

to a wireless router or wireless access point on the network.

• If you configured static IP addresses, verify that every device

has a unique IP address, that the first three sets of numbers

in the IP addresses match, and that the subnet masks on

every device are identical.

• If you have made configuration changes that might be

causing networking issues, reset all network settings to

factory defaults.

The stereo keeps locking up when connected to an

Apple device

• Press and hold the power button to reset the stereo.

• Reset the Apple device. Go to www.apple.com for more

information.

• Make sure you have the latest version of iTunes

and the

latest operating software on your Apple device.

The stereo is not finding my connected Apple device

• Make sure your Apple device supports Interface Accessory

Protocol 2 (iAP2). This stereo is not compatible with iAP1

devices.

• Make sure you have the latest version of iTunes and the

latest operating software on your Apple device.

• Make sure you have the latest version of the FUSION-Link

application on your Apple device.

• Reset the Apple device.

Go to www.apple.com for more information.

• Contact your FUSION dealer or send an email to FUSION

from www.fusionentertainment.com.

My Apple AirPlay audio is interrupted by short breaks

• Make sure the Apple device is not covered or obstructed.

• Make sure the Apple device has a good connection to the

same Wi‑Fi network as the stereo.

• Make sure the Apple device is not connected to the stereo

using Bluetooth technology and Wi‑Fi.

Using both a Bluetooth and a Wi‑Fi connection may cause

playback interruptions.

6 Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion Apollo MS-SRX400 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-SRX400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info