Bedienungsanleitung Fusion Apollo MS-WB670 (Seite 5 von 20) (Englisch)

740410

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Getting Started

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Stereo Buttons and Status LEDs

Because this device is designed to be installed in a location that

may not be easily accessible, almost all playback and device

interaction is done through a network-connected remote control,

stereo, or chartplotter. In some instances, you may need to

watch the LEDs or press the buttons on the device itself.

Stereo Buttons

Press to turn on the stereo.

Hold for two seconds to turn off the stereo.

Hold for ten seconds to restart the stereo.

Press to make the stereo discoverable to BLUETOOTH

devices.

and Press and hold both buttons together for ten seconds to reset

the stereo to factory settings.

Status LEDs

Icon LED Activity LED Status

Solid The stereo is receiving power.

Blinking The stereo is turning on.

Solid The stereo is on and operating normally.

Off The stereo is off.

Blinking The stereo is communicating using Ethernet.

Blinking The stereo is discoverable to BLUETOOTH

devices.

Solid The stereo is connected to a BLUETOOTH device.

Controls

NOTE: These stereo controls are available when you use a

connected remote control, such as a Fusion

ERX400. If you

control the stereo using a chartplotter or another stereo on the

network, you should see the owner's manual for that device for

more information.

Dial • Turn or press to open the CONTROL screen.

• Turn to adjust the volume.

• Turn to move through the menus or adjust a setting.

• Press to make a selection.

• Press and hold to activate certain functions such as opening

the radio presets or muting all connected stereos from the mute

screen (Muting all Connected Stereos, page 2).

• Press to turn on the remote control.

• Press to mute and un-mute the audio.

• Press and hold to open the POWER OFF menu.

NOTE: The remote control turns on and off when you turn the

home-zone stereo on or off.

• Press to open the menu.

• Press to return to the previous screen from the menu.

• Press and hold to exit the menu.

• SiriusXM: Press to open the browse menu.

• Press to select a source.

TIP: You can turn the dial to browse, and press the dial to

select the source.

• BT or USB:

◦ Press to skip to the beginning of the track or to the previous

track.

◦ Hold to rewind the current track.

• AM/FM:

◦ Auto or manual tuning: Press to tune to the previous station.

◦ Hold for faster station skipping in manual mode.

◦ Presets: Press to change to the previous preset.

• AUX: Press to decrease the gain for the connected source.

• SiriusXM source:

◦ In Live Mode, press to tune to the previous station or preset.

◦ In Live Mode, press and hold for faster tuning, in Manual

mode only.

◦ In Replay Mode, press to skip to the previous track.

◦ In Replay Mode, press and hold to rewind the current track.

• DAB: Press to return to the previous DAB station in the

ensemble. When you reach the beginning of the current

ensemble, the stereo automatically changes to the last

available station in the previous ensemble.

• BT or USB: Press to pause or resume the current track.

• AM/FM:

◦ Press to cycle through the tuning modes (auto, manual, and

presets).

◦ Press and hold to save the current station as a preset.

• SiriusXM source:

◦ Press and hold to switch between Replay Mode and Live

Mode.

◦ In Live Mode, press to cycle through the tuning modes

(Manual, Category, and Preset).

◦ In Replay Mode, press to pause and play.

• DAB: Press to scan for DAB stations.

• BT or USB:

◦ Press to skip to the next track.

◦ Hold to fast forward the current track.

• AM/FM:

◦ Auto or manual tuning: Press to tune to the next station.

◦ Hold for faster station skipping in manual mode.

◦ Presets: Press to change to the next preset.

• AUX: Press to increase the gain for the connected source.

• SiriusXM source:

◦ In Live Mode, press to tune to the next station or preset.

◦ In Live Mode, press and hold for faster tuning, in Manual

mode only.

◦ In Replay Mode, press to skip to the next track, if applicable.

◦ In Replay Mode, press and hold to fast-forward the current

track, if applicable.

• DAB: Press to advance to the next DAB station in the

ensemble. When you reach the end of the current ensemble,

the stereo automatically changes to the first available station in

the next ensemble.

Entering Text

In a field that allows you to enter text, select to erase the

existing characters.

If necessary, select or to use numerals or letters.

If necessary, select to change the case.

Turn the dial to choose a character, and press the dial to

select it.

Select to save the new text.

Using the Dial to Select Items

You can use the dial to highlight and select items on the screen.

• Turn the dial to highlight an item on the screen.

Getting Started 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion Apollo MS-WB670 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-WB670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info