Bedienungsanleitung Fusion Apollo MS-WB670 (Seite 7 von 20) (Englisch)

740410

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Select ZONE > PHONE VOLUME ZONE SYNC.

Select a zone or ALL.

When you adjust the volume on the source device, the volume

on the selected zone is also adjusted.

Adjusting the Gain for an Auxiliary Device

You can adjust the gain for a connected auxiliary device to

achieve a volume level similar to that of other media sources.

You can adjust the gain in 1 dB increments. You can also adjust

the gain for digital sources using an optical audio connection.

Select an auxiliary source.

Select an option:

• To increase the gain, select .

• To decrease the gain, select .

NOTE: To achieve the best audio quality when using a

portable media player with headphone output, it may be

necessary to adjust the volume control on the media player,

instead of adjusting the gain.

Speaker Zones

You can group speakers in one area into a speaker zone. This

enables you to control the audio level of the zones individually.

For example, you could make the audio quieter in the cabin and

louder on deck.

You can set the balance, volume limit, tone, subwoofer level,

subwoofer frequency, and name for each zone, and configure

other zone-specific settings (Speaker Zone Settings, page 10).

DSP Settings

This stereo features digital signal processing (DSP). You can

select pre-configured DSP settings for Fusion speakers and

amplifiers to optimize audio reproduction in their installed

locations.

All DSP settings are configured using the Fusion-Link

™

remote

control app (Fusion-Link Wireless Remote Control App,

page 12).

Configuring the DSP Settings

You must download and install the Fusion-Link remote control

app on your compatible Apple

or Android

™

device before you

can configure the DSP settings (Fusion-Link Wireless Remote

Control App, page 12).

You can configure the DSP settings to optimize the sound on

each zone with the installed speakers, amplifiers, and

environment.

From the settings menu on your Apple or Android device,

connect to the stereo using Bluetooth technology, or connect

to the same wireless network as the stereo.

Open the Fusion-Link remote control app on your compatible

Apple or Android device.

If necessary, select the stereo you want to configure.

Select SETTINGS.

If necessary, select the MUSIC tab.

Select Zone.

Select a zone.

Select DSP SETTINGS.

Configure the DSP settings as needed, depending on the

models of Fusion speakers and amplifiers connected to the

zone.

Repeat these steps for each zone.

After you have finished configuring the DSP settings for all

zones, select an option:

• On an Apple device, select SETTINGS > Zone >

SETTINGS > SEND DSP SETTINGS

• On an Android device, select SETTINGS > Zone > SEND

DSP SETTINGS.

Media Player Connection

CAUTION

Always disconnect your media player from the stereo when not

in use and do not leave it in your vessel. This helps reduce the

risk of theft and damage from extreme temperatures.

Do not remove the media player or use your stereo in a

distracting manner while operating the vessel. Check and obey

all marine laws in association with use.

The stereo accepts a variety of media players, including

smartphones and other mobile devices. You can connect a

compatible media player using a Bluetooth wireless connection

or a USB connection to the USB port. The stereo can play

media from Universal Plug and Play (UPnP) devices, such as a

Network Attached Storage (NAS) device connected to the same

network. The stereo can play media from a compatible Apple

device connected to the same network using the AirPlay

feature.

Bluetooth Device Playback

You can pair the stereo to up to eight Bluetooth media devices.

You can control the playback using the controls on a connected

remote control, chartplotter, or stereo on all Bluetooth devices,

and on some devices you can browse the music collection from

the menu on the remote control, chartplotter, or stereo.

On Bluetooth devices that do not support media browsing, you

should select the song or playlist on the media device.

The availability of song information such as song title, artist

name, track duration, and album art depends on the capability of

the media player and music application.

Connecting a Compatible Bluetooth Device

You can play media from a compatible Bluetooth device using

the Bluetooth wireless connection.

You can control the music playback with the media app on a

Bluetooth device or using the Fusion-Link remote control app

(Fusion-Link Wireless Remote Control App, page 12).

Select the BT source.

Select > DISCOVERABLE to make the stereo visible to

your compatible Bluetooth device.

TIP: You can also press the button on the stereo to make it

discoverable.

Enable Bluetooth on your compatible Bluetooth device.

Bring the compatible Bluetooth device within 10 m (33 ft.) of

the stereo.

On your compatible Bluetooth device, search for Bluetooth

devices.

On your compatible Bluetooth device, select the stereo from

the list of detected devices.

On your compatible Bluetooth device, follow the on-screen

instructions to pair and connect to the discovered stereo.

When pairing, your compatible Bluetooth device may ask you

to confirm a code on the stereo. The stereo does not display

a code, but it does connect correctly when you confirm the

message on the Bluetooth device.

If your compatible Bluetooth device does not immediately

connect to the stereo, repeat steps 1 through 7.

The DISCOVERABLE setting is disabled automatically after two

minutes.

Media Player Connection 3

Fusion Apollo MS-WB670 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-WB670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info