Bedienungsanleitung Fusion Apollo MS-WB670 (Seite 9 von 20) (Englisch)

740410

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

USB Source Settings

With the USB source selected, select .

REPEAT: Repeats the track or folder.

SHUFFLE: Shuffles the tracks in the folder, album, or playlist.

Radio

To listen to AM or FM radio, you must have a suitable marine

AM/FM antenna properly connected to the stereo and be within

range of a broadcasting station. For instructions on connecting

an AM/FM antenna, see the stereo installation instructions.

To listen to SiriusXM

radio, you must have the appropriate

equipment and subscriptions (SiriusXM Satellite Radio,

page 6). For instructions on connecting a SiriusXM Connect

Vehicle Tuner, see the stereo installation instructions.

To listen to DAB stations, you must have the appropriate

equipment (DAB Playback, page 8). For instructions on

connecting a DAB adapter and antenna, see the installation

instructions provided with your adapter and antenna.

Setting the Tuner Region

You must select the region you are in to receive AM and FM

stations properly.

If you are connected to a compatible SiriusXM tuner and

antenna, and have a subscription (USA only), you must select

the region you are in to receive SiriusXM stations properly.

NOTE: SiriusXM is not available in all regions.

If you are connected to a compatible DAB module and antenna

(not included), you must select the region you are in to receive

DAB stations properly.

NOTE: DAB stations are not available in all regions.

Select > SETTINGS.

Select the name of the connected stereo.

Select TUNER REGION.

Select the region you are in.

Changing the Radio Station

Select an applicable source, such as FM.

Select to select a tuning mode.

You can use AUTO mode to scan stations, MANUAL mode to

manually tune to a station, and PRESET mode to select the

next preset station.

Select or to tune to the station.

TIP: You can quickly save the selected station or channel as

a preset by holding .

Apple AirPlay

Connecting an Apple Device Using AirPlay

From the settings menu on your Apple device, connect to the

same wireless network as your compatible Fusion stereo.

NOTE: You can connect some Apple devices to the network

using a wired Ethernet connection, if applicable. Go to the

Apple website for more information.

On your Apple device, open the music app you want to

stream to the stereo.

From the music app or program, select or , and select

the name of the stereo.

If necessary, start playing music on the app.

The stereo changes to the AirPlay source automatically and

plays audio from your Apple device.

NOTE: If your Apple device is using AirPlay 2 software, you

can connect to multiple stereos on the same network.

NOTE: You cannot stream the AirPlay source to other

stereos on the network using the Fusion PartyBus network

(Fusion PartyBus Networking, page 9). Using AirPlay 2

software, you can play content on multiple stereos on the

network, but the stereos must not be grouped.

NOTE: On some AirPlay devices, adjusting the volume on

the device affects the volume level on the stereo.

Setting an AirPlay Password

You can set a password that a user must enter when connecting

to the stereo using the AirPlay feature.

Select > SETTINGS > AirPlay PASSWORD.

Enter a password.

NOTE: The AirPlay password is case-sensitive.

When connecting to this stereo using the AirPlay feature, the

user must enter the password on their Apple device.

Network UPnP Playback

This stereo can play content from Universal Plug and Play

(UPnP) devices connected to the network, such as computers

and media servers. You must connect your UPnP device to the

same network as the stereo using a wired or wireless

connection, and you must configure the device to share media

over the network. See the owner's manual from your UPnP

device for more information.

After you have connected your UPnP device to the network and

configured it to share media, the UPnP source appears on the

source selection screen of each stereo on the network

(Selecting a Source, page 2).

Connecting a UPnP Device

You must connect your stereo to a network to play media from a

UPnP device, such as a NAS device.

Connect your UPnP device to the same network as the

stereo, referring to the instructions provided with your UPnP

device and router if necessary.

Select the UPnP source on the stereo (Selecting a Source,

page 2).

You can browse and play media from the UPnP device.

Connecting an Auxiliary Device

You can connect various auxiliary devices to the stereo. These

devices have either RCA connectors, a line output, or a

headphone output jack.

Locate the auxiliary connectors on the wiring harness.

If necessary, connect an RCA-to-3.5 mm adapter cable to the

auxiliary device.

Connect the auxiliary device to the AUX IN RCA connectors

on the wiring harness.

Select the Aux source.

Optical Audio Connection

You can connect devices with an optical audio output to the

stereo using an optical audio cable. Televisions, DVD players,

CD players, and other devices may supply digital optical audio

output.

This stereo supports PCM audio only. You may have to change

the settings on your device to output PCM audio.

NOTE: Because streaming audio over the Fusion PartyBus

network introduces a slight delay, streaming content from a

Radio 5

Fusion Apollo MS-WB670 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-WB670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info