Bedienungsanleitung Fusion Apollo MS-WB670 (Seite 4 von 6) (Englisch)

740410

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

NMEA 2000 power cable

NMEA 2000 drop cable from the stereo, up to 6 m (20 ft.)

NMEA 2000 drop cable from the chartplotter MFD or compatible

FUSION NMEA 2000 remote control

9 to 16 Vdc power supply

NMEA 2000 terminator or backbone cable

NMEA 2000 T-connector

NMEA 2000 terminator or backbone cable

FUSION PartyBus Networking

The FUSION PartyBus networking feature allows you to connect

multiple compatible stereos together on a network, using a

combination of wired or wireless connections.

You can group a compatible stereo, such as the Apollo WB670

stereo, with other compatible stereos connected to the network.

Grouped stereos can share available sources and control media

playback on all of the stereos in the group, which allows for a

synchronized audio experience across the vessel. You can

quickly create, edit, and break up groups as needed from any

compatible stereo or remote control on the network.

NOTE: A zone stereo, such as the Apollo ERX400, can create

or join a group to control and play sources from other stereos,

but it cannot share its sources with the group.

For additional considerations when sharing sources, see the

owner's manual.

You can use compatible stereos and remote controls, whether

they are grouped or not, to adjust the volume of the available

speaker zones for any stereo on the network.

Wired Networking Considerations

When you are planning your network installation, observe the

following considerations for all wired connections.

• You must connect devices using standard Cat5e or Cat6

network cables with RJ45 connectors.

• You can use one network cable to directly connect two

compatible devices.

• You must use wired network switches and wired or wireless

network routers when you connect more than two compatible

devices to a network.

• If you install a router on the network, it should be configured

to be a DHCP server by default. See your router instructions

for more information.

• If you do not install a router, and there are no other DHCP

servers on the network, you should configure one FUSION

PartyBus stereo to be a DHCP server.

Wired Network Example for Direct Connections

No network setting changes are needed when connecting two

devices together directly.

FUSION PartyBus zone stereo or remote control

Apollo MS-WB670 stereo

FUSION PartyBus stereo

Wired Network Example with a Switch or Router

You must use wired network switches, a wired network router, or

both to connect more than two FUSION PartyBus devices.

No network setting changes are needed when connecting

multiple FUSION PartyBus devices using a switch, but if you are

using a router, you may need to configure it to be a DHCP

server. See your router instructions for more information.

FUSION PartyBus zone stereo or remote control

Wired network switch or wired network router

Apollo MS-WB670 stereo

FUSION PartyBus stereo

Constructing a Network

You should have a basic understanding of networking when

building a network for FUSION PartyBus devices.

These instructions guide you through the basics of building and

configuring a network, and should apply to most situations. If

you need to perform advanced networking tasks, such as

assigning static IP addresses to devices on the network or

configuring advanced settings on a connected router, you may

need to consult a networking professional.

Determine the installation location of the FUSION PartyBus

devices you want to connect to the network.

NOTE: Wired connections are more reliable than wireless

connections. When planning your network, you should run

network cables instead of using wireless connections when

possible.

Determine the installation location of any needed network

routers or switches.

Route Cat5e or Cat6 network cable to the installation

locations of the stereos, switches, and router.

Connect the network cables to the stereos, switches, and

router.

NOTICE

Do not completely install the stereos yet. You should test the

network before you install the stereos.

Turn on all devices connected to the network, including

wireless devices.

If you are using a network router (wired or wireless), consult

the documentation provided with your router to configure the

router as the DHCP server, if necessary.

All stereos should use their default configuration (DHCP

CLIENT).

Test the network by viewing the list of FUSION PartyBus

devices from the CONTROL screen on each device on the

network and select an option:

• If any devices are not available to the network,

troubleshoot the network (Network Troubleshooting,

page 5).

• If all devices are available to the network, complete the

installation for each stereo, if necessary.

4 Apollo MS-WB670 Installation Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion Apollo MS-WB670 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-WB670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info