Bedienungsanleitung Fusion Apollo MS-WB670 (Seite 5 von 6) (Englisch)

740410

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Network Configuration

Setting the Stereo as the DHCP Server

If you connected more than two network devices together

directly or using a network switch or wireless access point and

did not install a router, you should configure only one FUSION

PartyBus stereo to be a DHCP server.

Select > SETTINGS > NETWORK > STATIC IP > SAVE.

Select ADVANCED > DHCP SERVER > DHCP ENABLED >

SAVE.

Configuring the Stereo for use with a Garmin

Marine

Network

You can connect this stereo to a Garmin Marine Network in

order to view and control the stereo using a compatible Garmin

chartplotter.

NOTE: When you configure the stereo for use with a Garmin

Marine Network, you are limited to using only Garmin and

FUSION devices. You cannot use third-party routers, phones,

storage devices, or other network products with this stereo.

Select > SETTINGS > NETWORK > GARMIN MARINE

NETWORK.

Resetting Network Settings

You can reset all network settings for this stereo to the factory

default values.

Select > SETTINGS > NETWORK > RESET > YES.

Advanced Network Configuration

You can perform advanced networking tasks on a FUSION

PartyBus device, such as defining DHCP ranges and setting

static IP addresses. See the owner's manual for more

information.

Network Troubleshooting

If you cannot see or connect to FUSION PartyBus devices on

the network, check the following:

• Verify that only one device, either a stereo or a router, is

configured as a DHCP server.

• Verify that all FUSION PartyBus devices, network switches,

routers, and wireless access points are connected to the

network and turned on.

• Verify that wireless FUSION PartyBus devices are connected

to a wireless router or wireless access point on the network.

NOTE: Wired connections are more reliable than wireless

connections. If possible, you should connect devices to the

network using an Ethernet cable.

• You may experience wireless interference if there are many

nearby wireless access points. Change the channel on your

router or wireless access point to test for and correct

interference.

• Connecting a Bluetooth

device to a stereo configured as a

wireless access point or client may reduce wireless

performance. Disconnect Bluetooth devices to test for and

correct interference.

• If you configured static IP addresses, verify that every device

has a unique IP address, that the first three sets of numbers

in the IP addresses match, and that the subnet masks on

every device are identical.

• If you have made configuration changes that might be

causing networking issues, reset all network settings to the

factory default values.

Stereo Information

Specifications

Weight 475 g (16.75 oz.)

Water rating IEC 60529 IPX2

Operating temperature range From 0 to 50°C (from 32 to 122°F)

Storage temperature range From -20 to 70°C (from -4 to 158°F)

Input voltage From 10.8 to 16 Vdc

Current (max.) 15 A

Current (muted) Less than 700 mA

Current (off) Less than 100 mA

Fuse 15 A mini blade-type

NMEA 2000 LEN @ 9 Vdc 1 (50 mA)

Bluetooth wireless range Up to 10 m (30 ft.)

ANT

wireless range Up to 3 m (10 ft.)

Wireless frequencies/protocols Bluetooth 2.4 GHz @ 12 dBm nominal

ANT 2.4 GHz @ 7 dBm nominal

Compass-safe distance 15 cm (6 in.)

On-board, Class D amplifier

Output music power per

channel

4 x 70 W max. 2 ohm

Total output peak power 280 W max.

Output power per channel 4 x 43 W RMS at 14.4 Vdc input, 2 ohm,

10% THD

4 x 26 W RMS at 14.4 Vdc input, 4 ohm,

10% THD

Line output level (max.) 5.5 V (peak to peak)

Aux input level (typical) 1 V RMS

Stereo Dimension Drawings

Side Dimensions

107 mm (4.21 in.)

55 mm (2.17 in.)

130 mm (5.10 in.)

Top Dimensions

Vertically dripping water shall have no harmful effect when the enclosure is tilted

at an angle of 15° from its normal position.

The stereo may limit the output power to prevent the amplifier from overheating,

and to maintain the audio dynamics.

Apollo MS-WB670 Installation Instructions 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion Apollo MS-WB670 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-WB670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info