Bedienungsanleitung Fusion Apollo RA770 (Seite 13 von 20) (Englisch)

691366

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

The source icon is in the lower-left corner of the stereo

screen, and shows the source that is currently playing.

Select PARTYBUS

TIP: You can press and hold the source icon to show

available FUSION PartyBus devices.

The device shows a list of available FUSION PartyBus

devices on the network.

Select the device you want to stream from.

The stereo begins streaming the same source as the connected

FUSION PartyBus device, and a green border appears around

the device screen. All media playback functions affect both

devices.

Stopping Streaming from a FUSION

PartyBus Device on the Network

If you are streaming from a FUSION PartyBus device on the

network, you must disconnect from the device before you can

play local sources on the stereo.

Select the source icon.

The source icon is in the lower-left corner of the stereo

screen, and shows the source that is currently playing.

Select PARTYBUS > LEAVE PARTYBUS.

TIP: You can press and hold the source icon to quickly leave

the FUSION PartyBus network.

Network UPnP Playback

This stereo can play content from Universal Plug and Play

(UPnP) devices connected to the network, such as computers

and media servers. You must connect your UPnP device to the

same network as the stereo using a wired or wireless

connection, and you must configure the device to share media

over the network. See the owner's manual from your UPnP

device for more information.

After you have connected your UPnP device to the network and

configured it to share media, the UPnP source appears on the

source selection screen of each stereo on the network

(Selecting a Source, page 1).

General Settings

Select > .

NOTE: When an check box is filled, the option is on. When the

check box is clear, the option is off.

ZONE: Enables you to configure the speaker zones (Speaker

Zone Settings, page 9).

BRIGHTNESS: Adjusts the screen and dial backlight brightness

(Adjusting the Backlight and Dial Brightness, page 2).

TUNER REGION: Sets the region used by the FM, AM, DAB,

and SiriusXM sources.

LANGUAGE: Sets the language on the device.

DEVICE NAME: Sets a name for this stereo.

TELEMUTE: Sets the behavior of the mute function when the

device is connected to a hands-free mobile phone. When a

call is received, the device can either mute the audio or

broadcast the call through the Aux1 input. See your hands-

free kit instructions.

SEARCHING: Enables FUSION Alpha Search Technology

(FAST), which allows you to quickly search for tracks by letter

or number. You can select a number to enable the FAST

menu if your music device contains more than the selected

number of items.

AirPlay PASSWORD: Sets a password that a user must enter

when connecting to the stereo using the AirPlay feature

(Setting an AirPlay Password, page 3).

POWER OPTIONS: Adjusts power settings, such as the power-

save mode (Power Options, page 9).

PARTYBUS SETTINGS: Sets the sources the device can

stream over the FUSION PartyBus network. You may want to

disable some sources, such as OPTICAL, because streaming

over the network introduces a small audio lag that is not

desirable in some situations.

NETWORK: Enables you to configure the device network

settings (Network Configuration, page 10).

UPDATE: Updates the stereo or connected devices (Update

Options, page 11).

ABOUT: Shows the software version information for the stereo.

Speaker Zone Settings

Setting a Zone Name

You can set a name for a speaker zone to make it easier to

identify.

Select > > ZONE.

Select a zone.

Select ZONE NAME.

Use the on-screen keyboard to enter a name, and select .

Linking Zones

You can link zones 1 and 2 to keep the volume levels

synchronized. Adjusting the volume of either of the linked zones

affects both zones.

Select > > ZONE > ZONE 2 > LINK TO ZONE 1.

When zones 1 and 2 are linked, appears on zones 1 and 2 on

the volume screen.

NOTE: After zones 1 and 2 are linked, you cannot adjust the

volume of each zone individually.

Enabling Volume Control of Zone 3 or 4 from a

Connected Amplifier

By default the volume of zones 3 and 4 are controlled by the

stereo. You can control the volume of these zones using the

connected amplifier instead.

Select > > ZONE.

Select zone 3 or zone 4.

Select VOLUME CONTROL to clear the check box.

The audio signal from the zone is provided to the amplifier as a

fixed-line-level output.

Disabling a Zone

You can disable an unused zone and remove it from the audio

level pages. When a zone is disabled, you cannot change any of

the settings for that zone. You can disable zones 2, 3, and 4

only.

Select > > ZONE.

Select a zone.

Select ZONE ENABLED to clear the check box.

Disabling the Internal Amplifiers

If you do not connect speakers directly to zones 1 and 2, you

can disable the internal amplifiers to reduce power consumption.

Select > > ZONE.

Select INTERNAL AMP ON to clear the check box.

Power Options

Select > > POWER OPTIONS.

NOTE: When an check box is filled, the option is on. When the

check box is clear, the option is off.

POWER SAVE: Disables the LCD backlight after one minute of

inactivity to save battery power.

General Settings 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion Apollo RA770 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo RA770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info