Bedienungsanleitung Fusion Apollo RA770 (Seite 15 von 20) (Englisch)

691366

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Select an option:

• If the stereo is connected using an Ethernet cable, select

ETHERNET IP > STATIC IP.

• If the stereo is set as a wireless access point or wireless

client, select WI-FI STATIC IP.

Select an option:

• To set the IP address, select IP, and enter the IP address.

• To set the subnet mask, select MASK, and enter the

subnet mask.

NOTE: The subnet mask must match all other devices on

the network to work properly. A typical subnet mask is

255.255.255.0.

• To set the default gateway IP address, select GATEWAY,

and enter the gateway IP address.

NOTE: The default gateway is typically set as the IP

address of the DHCP server on the network.

Select SAVE.

Resetting Network Settings

You can reset all network settings for this stereo to the factory

default values.

Select > > NETWORK > RESET > YES.

Update Options

Select > > UPDATE.

NOTICE

Do not turn off the stereo or disconnect the power during a

software update. Turning off the power during a software update

may cause the stereo to become unresponsive.

NOTE:

• When possible, you should perform device updates using the

FUSION-Link app on a smartphone connected to the same

network as the stereo. You should use a USB flash drive only

if necessary.

• The stereo may restart a few times when updating. This is

normal.

• You can program only newer versions of software on the

stereo.

STEREO: Updates the stereo using a valid software update file

on a connected USB flash drive.

NRX REMOTE: Updates an optional NRX remote connected to

the NMEA 2000 port or NMEA 2000 network using a valid

software update file on a connected USB flash drive.

DAB MODULE: Updates an optional DAB module connected to

the SIRIUS XM port using a valid software update file on a

connected USB flash drive.

FACTORY RESET: Restores all settings to the factory default

values.

Additional Stereo Control Options

FUSION-Link Remote Control App

You can use the FUSION-Link remote control app on your

compatible Apple or Android device to adjust the stereo volume,

change the source, control playback, select and manage radio

presets, and adjust some stereo settings.You can use the app to

set up and configure DSP profiles on the stereo.You can use the

app to update the stereo software wirelessly

The app communicates with the stereo using a wireless

connection to the mobile device. You must connect your

compatible device to the stereo using Bluetooth or Wi‑Fi

technology to use the app.

If the stereo is connected to a network with a Wi‑Fi access point,

the app can communicate with the stereo using the network for

greater range than a Bluetooth connection.

NOTE: You must connect the app using a Wi‑Fi connection to

update the stereo software wirelessly. You cannot update device

software using a Bluetooth connection.

For information about the FUSION-Link remote control app for

compatible Apple or Android devices, go to the Apple App

Store

or the Google Play

™

store.

FUSION-Link

™

Network Technology

FUSION-Link network technology allows you to fully control

compatible FUSION entertainment systems on compatible multi-

function displays installed at the helm, flybridge, or navigation

station of the vessel. This provides integrated entertainment

control and a less cluttered console.

The partnered multi-function display becomes the portal on

which you can control all audio on the vessel, no matter where

on the vessel the connected stereo is installed. The FUSION-

Link equipped stereo can be installed out of sight if space is an

issue and users need to access the stereo only to replace

removable media.

FUSION-Link technology on this device can communicate using

existing industry-standard network connections including

Ethernet and Wi‑Fi wireless technology.

FUSION-Link technology offered on this device can

communicate using existing industry-standard NMEA 2000

networks.

For a list of FUSION-Link capable products from companies

partnered with FUSION, go to www.fusionentertainment.com.

NMEA 2000 Remote Control and Display

The stereo can be controlled by compatible FUSION wired

remote controls installed in the audio zones throughout the

vessel. Operating the entertainment system from the remote

control is similar to operating it from the main stereo.

FUSION wired remote controls operate over an existing NMEA

2000 network, so wiring the remote controls directly to the

stereo is not necessary. All remote controls connected to the

same NMEA 2000 network as the stereo can control the stereo.

If your vessel does not have a NMEA 2000 network, you can

directly connect a single FUSION remote control or create a

FUSION remote control network to connect multiple FUSION

wired remote controls directly to the NMEA 2000 connector on

the stereo. See the installation instructions provided with your

stereo and remote for more information.

The FUSION wired remote control can also serve as an NMEA

display showing NMEA navigation data or vessel performance

data from other NMEA devices on an existing NMEA 2000

network. See the instructions provided with your remote control

for information on supported NMEA 2000 PGN information.

Configuring an Optional Wired Remote

NOTICE

The stereo is configured by default to work with a NMEA 2000

network, and the NRX POWER option should be enabled only

when an optional remote is connected directly to the stereo.

Enabling this option when the stereo is connected to a NMEA

2000 network may damage other devices on the NMEA 2000

network.

If you connect an optional wired NRX remote directly to the

stereo, and not through a NMEA 2000 network , additional

configuration is needed.

Select > > NMEA.

Additional Stereo Control Options 11

Fusion Apollo RA770 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo RA770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info