Bedienungsanleitung Fusion Apollo RA770 (Seite 16 von 20) (Englisch)

691366

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Select an option:

• If you connected both your stereo and your optional wired

remote to a NMEA 2000 network, make sure the NRX

POWER option is not selected. This enables the optional

remote to receive power from the NMEA 2000 network.

• If you connected the optional wired remote directly to the

stereo through the NMEA 2000 connector, select the NRX

POWER option. This enables the stereo to supply power

to the optional remote.

NMEA 2000 Information

NMEA 2000 is the most popular marine standard for data

communication within vessels. It has become the standard for

sending navigation and engine management data within

vessels. FUSION introduces an industry-first product by

incorporating NMEA 2000 functionality in its audio remote

control devices. This enables the user to monitor a series of

NMEA sentences available over the NMEA 2000 network on a

connected remote control.

Go to www.fusionentertainment.com for a full list of supported

NMEA sentences.

Appendix

Registering Your Apollo RA770

Help us better support you by completing our online registration

today.

• Go to www.fusionentertainment.com.

• Keep the original sales receipt, or a photocopy, in a safe

place.

Troubleshooting

The stereo does not respond to key presses

• Hold until the stereo turns off, and turn it on again to reset

the stereo.

• Disconnect power to the stereo for two minutes to reset the

stereo.

The stereo keeps locking up when connected to an

Apple device

• Press and hold the power button to reset the stereo.

• Reset the Apple device. Go to www.apple.com for more

information.

• Make sure you have the latest version of iTunes

and the

latest operating software on your Apple device.

The stereo is not finding my connected Apple device

• Make sure your Apple device supports Interface Accessory

Protocol 2 (iAP2). This stereo is not compatible with iAP1

devices.

• Make sure you have the latest version of iTunes and the

latest operating software on your Apple device.

• Make sure you have the latest version of the FUSION-Link

application on your Apple device.

• Reset the Apple device.

Go to www.apple.com for more information.

• Contact your FUSION dealer or send an email to FUSION

from www.fusionentertainment.com.

My Apple AirPlay audio is interrupted by short breaks

• Make sure the Apple device is not covered or obstructed.

• Make sure the Apple device has a good connection to the

same Wi‑Fi network as the stereo.

• Make sure the Apple device is not connected to the stereo

using Bluetooth technology and Wi‑Fi.

Using both a Bluetooth and a Wi‑Fi connection may cause

playback interruptions.

My Bluetooth audio is interrupted by short breaks

• Ensure the media player is not covered or obstructed.

Bluetooth technology performs best with line-of-sight

operation.

• Bring the media player within 10 m (33 ft.) of the stereo.

• Turn off the DISCOVERABLE setting after pairing a

Bluetooth device to the stereo.

The stereo does not display all song information from

my Bluetooth source

The availability of song information such as song title, artist

name, track duration, and album cover artwork depends on the

capability of the media player and music application.

Network Troubleshooting

If you cannot see or connect to FUSION PartyBus devices on

the network, check the following:

• Verify that only one device, either a stereo or a router, is

configured as a DHCP server.

• Verify that all FUSION PartyBus devices, network switches,

routers, and wireless access points are connected to the

network and turned on.

• Verify that wireless FUSION PartyBus devices are connected

to a wireless router or wireless access point on the network.

• If you configured static IP addresses, verify that every device

has a unique IP address, that the first three sets of numbers

in the IP addresses match, and that the subnet masks on

every device are identical.

• If you have made configuration changes that might be

causing networking issues, reset all network settings to

factory defaults.

Network Status Icons

A network-status icon is shown on some screens of the stereo.

You can refer to this table to understand the appearance of the

icon and help diagnose issues with the FUSION PartyBus

network (Network Troubleshooting, page 12).

The stereo is configured for a wired network connection and

connected correctly to a wired network using an Ethernet cable.

The stereo is configured for a wired network connection, but

cannot detect the wired network. An Ethernet cable may not be

connected or there may be other problems with the network.

The stereo is configured as a wireless access point.

The stereo is configured as a wireless client and connected to a

wireless access point. The number of bars indicates the signal

strength.

The stereo is configured as a wireless client, but is not connected

to a wireless access point. There may be a problem with the

connection settings or with the wireless access point.

Specifications

General

Weight 750 g (26.5 oz.)

Water resistance IEC 60529 IPX7 (front of stereo only,

when properly installed)

Operating temperature range From 0 to 50°C (from 32 to 122°F)

Storage temperature range From -20 to 70°C (from -4 to 158°F)

Input voltage From 10.8 to 16 Vdc

Current (max.) 15 A

Current (muted) Less than 900 mA

Current (off, standby mode

enabled)

110 mA

12 Appendix

Fusion Apollo RA770 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo RA770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info