Volume limit
Use this option to set the maximum output volume level that can be selected by users.
To maximum volume limit:
1. Press the Menu key.
2. Turn and then press the Encoder to select Settings > Volume limit.
3. Turn the Encoder to set the require volume level.
4. Press the Menu key (or leave to time out) to save the setting and exit.
Note: The volume limit setting controls the maximum volume output level but does not limit
the volume shown on the Volume screen.
TROUBLESHOOTING
Resetting the unit
Should the RA50 unit become unresponsive:
• Press and hold the ‘Power’ button for 10 seconds to reset the unit.
• Reset your iPod/iPhone.
• Remove all power for 5 minutes and then reconnect.
Tuning
If you are unable to tune to radio stations, check you have the correct tuner region selected
For further information, see “Tuner region” on page 23 .
iPod TROUBLESHOOTING
Problem Solution
iPod
Why do I get an error message when I dock my iPhone to my MS-RA50
Some iPhone models may intermittently display the message: “This accessory is not made to
work with the iPhone. Would you like to turn on airplane mode to reduce audio interference?
You will not be able to make or receive calls.” when initially docked with any FUSION iPhone
compatible product. All FUSION iPhone-supported products have been tested and certified by
Apple, and passed Apple’s stringent “Works with iPhone” self-certification test.
Despite this message, all fusion iPhone-compatible products are fully functional and compatible
with Apple’s iPhone product line.
Please choose “NO”, or simply wait for this message to time out.
APPENDICES
ADJUSTING TONE
To change the bass or treble level:
ADJUSTING SCREEN BRIGHTNESS
Use the LCD menu to adjust the contrast or brightness of the screen display.
You can press the Menu key at any time (or leave to time out) to save the current brightness
level and exit.
To adjust the contrast or brightness of the display screen:
Screen brightness can be linked to the vessels lighting system, see “Installing the RA50”
on page 19
Press Menu
key
Press Menu
key
The Tone menu is
displayed
The LCD menu is
displayed
Turn Encoder to
adjust. Press
Encoder to
select.
Turn Encoder to
adjust. Press
Encoder to
select.
Press Menu to
exit. See “Menu
Key Operation”
on page 5.
Press Menu to
exit. See “Menu
Key Operation”
on page 5.
Select:
Settings > Tone
Select:
Settings > LCD
