Bedienungsanleitung Futaba 12Z (Seite 24 von 127) (Englisch)

29029

Zoom out

Zoom in

Vorherige Seite

1/127

Nächste Seite

is displayed and the frequency data is sent to the receiver

together with a message sound. (The frequency data can be

resent by selecting [RETRY] and pushing the enter button.)

8. Turn on the receiver power while the new

frequency data above is displayed.

*When receiver frequency setting is complete, the receiver

monitor LED blinks once and the CH1 servo shuttles 3

times across the neutral position.

*The new receiver frequency data uses very low power whose

frequency is different from that of frequency channel used.

When setting the receiver frequency, bring the transmitter

and receiver as close together as possible.

*If the new data is not read correctly due to the ambient

conditions, extend the transmitter antenna and bring the

transmitter close to the receiver antenna and repeat steps 5

through 7.

*The frequency can also be changed by connecting the

transmitter and receiver directly with the DSC cord and

performing steps 5 through 8.

*When the receiver ID code is incorrect, the monitor LED

will blink. Return to the receiver ID setup screen and reset

the receiver ID.

9. When frequency setting is complete, move

the cursor to the [END] position and push the

enter button.

10.A confirmation message ("TRANSMIT?") is

displayed. To send on the new frequency,

select [YES] and push the enter button.

*To not transmit, select [NO] and push the enter button.

In case of using PCM1024, PPM receivers

*Make sure that PCM1024 or PPM is set as a modulation

scheme. Then change the frequency by the following

instruction.

How to change the frequency

7XUQRQWKHWUDQVPLWWHUSRZHU$FRQÀUPDWLRQ

message ("TRANSMIT?") is displayed. Since

you do not want to transmit, select [NO] and

then push the enter button.

2. Select [FREQUENCY] of the area that displays

the frequency on the home screen or in the

linkage menu and push the enter button.

*The frequency setup screen appears.

﷈ﶰ﷊ﶲﶪ﷊ﶸ﷎ﶢ

ﴶﴸﴸﳜ

﷐﷒ﶸ﷌ﵺﶸﶶﵾﶈ﷈ﶰ﷊ﶲﵾ﷎ﷄﶆﶞ

ﻚｄＸﻚﻨＸｂﻞｄ｀ｆ：Ｄ＀ﻦ

Ｘｂ：Ｄ＀

ﶺﶶ﷌ﶪﶼ﷒ﶬﷂﶶﶸﵺﵺﵺﵺﵺﵺﵺﶞ

﷈ﶰ﷊ﶲﵾ﷐﷒ﶸ﷌ﶞﵼﵺ﷒ﶰ﷊﷒ﵺﶞ

＠Ｒ４Ｒ８

４Ｎ：ｄｆｂ＾

ﶺﶶ﷌﷊ﶼ﷤

﷎ﶶﶸ﷌ﷂﶬ﷤

ﴶﴸﳰﴶﴸﳰﴸﴸ

3. When switching the frequency, select [BAND

NO.] and push the enter button.

*The frequencies which can be selected appear on the screen.

4. Select the frequency you want to use and

push the enter button.

$FRQ¿UPDWLRQPHVVDJHDSSHDUV

5. If the frequency is correct, push the enter

button.

6.A confirmation message ("TRANSMIT?") is

displayed. To send on the new frequency,

select [YES] and push the enter button.

*To not send, select [NO] and push the enter button.

Registration of the user's name

T12Z transmitter can register user's name.

How to register user's name

1. Turn on the power of the transmitter.

2. Select [USER NAME] of the area that displays

the user's name on the home screen or in the

system menu and push the enter button.

*The user name set up screen appears.

ﶪﶮ﷊ﶰﵺﶸ﷒ﶺ﷊

ﶮ﷊ﶼ﷊﷎ﶬﶞ

＊．Ｊ０ﻚ８Ｒ：Ｊ

ﴶﴸﴸﳜ

ＢＬﻚ８＊：ＰＪ０

．ＪＮ＊０Ｊﻚ：６ＬＪ

ﶺﶶ﷌﷊ﶼ﷤

﷎ﶶﶸ﷌ﷂﶬ﷤

ﴶﴸﳰﴶﴸﳰﴸﴸ

3. Select [USER NAME] and push the enter

button. Then the set up screen will pop up.

You can use up to 12 characters as a user's

name.

ﶪﶮ﷊ﶰﵺﶸ﷒ﶺ﷊

ﴶﴸﴸﳜ

ﹶ﹘﹚ﺀﹾﺀ︨ﹼ﹤﹞﹢

Ｈ＊，ＲＰＲＮ６０４ﻚﻚ

Ｊ８，Ｊ０

ﴌﴈﳺﴔﴊﴘﳌﴠﳼﴂﴀﴈﴂﳰ

ＲＰＮＬＪＨＦＤＢ＠＞＜

：８６４２０．，＊（＆＄

＂＀ｆｄｂ｀＾＼ＺＸＶＴ

ﻜﻞﻬ﻾ﻤﻠﻢ

ﺘ ﺖ

ﶺﶶ﷌﷊ﶼ﷤

﷎ﶶﶸ﷌ﷂﶬ﷤

ﴶﴸﳰﴶﴸﳰﴸﴸ

*For a description of the user's name registering: p.33.

4. Push "Return" key to return to the previous

screen after entering the user's name.

(If you want to protect the user's name)

If you don't want anybody else to change your

user's name, set your ID.

*Please be aware that you will not able to change user's name

if you forget your password.

*For a description of the user's name protection method: p.33.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba 12Z Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info