Bedienungsanleitung Futaba 6EXHP (Seite 14 von 24) (Englisch)

28987

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

N-TH Normal throttle curve function

Used to set throttle curve for normal ﬂight. 5-point throttle curve is utilized to best match the blade collective pitch to the engine

RPM for consistent load on the engine. Throttle curve can be adjust from 0-100% each point.

This normal throttle curve create basic curve for around hovering. Use this function together with the normal pitch curve (see

Normal pitch curve) so that up/down control has a constant engine speed.

To set the normal throttle curve:

1. Enter the programming mode and use the MODE key to access the

“N-TH” function.

Throttle stick position number will appears on left side of display and “%” symbol will be

ﬂashing.

2. Use SELECT key to select the desire curve point. Point 1 is shown initially which is throttle

stick all the way downward (slow) position. Point 5 is throttle stick all the way upward (hi)

position.

3. Push up or down DATA INPUT lever to set the servo position.

4. Use SELECT key to set other points with same manner.

N-PI Normal pitch curve function

Used to set pitch curve for normal ﬂight. 5-point pitch curve is utilized to best match the blade collective pitch to the engine

RPM for consistent load on the engine. Pitch curve can be adjust from 0-100% each point.

This normal pitch curve create basic curve for around hovering. Use this function together with the normal throttle curve so

that up/down control has a constant engine speed.

To set the normal pitch curve:

1. Enter the programming mode and use the MODE key to access the

“N-PI” function. Throttle

stick position number will appears on left side of display and “%” symbol will be ﬂashing.

2. Use SELECT key to select the desire curve point. Point 1 is shown initially which is throttle

stick all the way downward (slow) position. Point 5 is throttle stick all the way upward (hi)

position.

3. Push up or down DATA INPUT lever to set the servo position.

4. Use SELECT key to set other points with same manner.

I-TH Idle-up throttle curve function

Used to set throttle curve for idle up ﬂight. 5-point throttle curve is utilized to best match the blade collective pitch to the engine

RPM for consistent load on the engine when idle up function is on. Throttle curve can be adjust from 0-100% each point.

This idle up throttle curve is to set for consistent engine RPM and can be activated at any time when mid air maneuvers are

executed, such as loops, rolls, and 3D ﬂight even when reduced the blade collective pitch.

To set the idle-up throttle curve:

1. Enter the programming mode and use the MODE key to access the

“I-TH” function.

2. Push the DATA INPUT lever upward. This will cause the ﬂashing

“INH” display to change

to a ﬂashing

“ON” display. Now the I-TH function is on. Push the SELECT key, throttle stick

position number will appears on left side of display and “%” is blinks.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba 6EXHP Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info