Bedienungsanleitung Futaba 9ZAP_part2 (Seite 3 von 78) (Englisch)

29045

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Airplane Section

14.

Flight Conditions Switching

If you like, you may set up the system to call up

more than one function or switch to a new set of trims

or control settings simultaneously by moving a single

switch. You can have different subtrims, coupling,

differential, exponentials, and throw volumes. In fact

you may change EVERY parameter between flight

modes.

We recommend that you fly the model and adjust

trims and control responses to your liking before

defining another flight condition. Any bad tendencies

may be corrected with custom programmable mix

settings

PMX

. Then, copy the set of adjustments to

a new flight condition, where they may be modified

for the new desired conditions. After copying you

may add new functions as necessary.

Use the Condition Select

CSL

button in the

Model Menu. This function allocates the necessary

number of flight conditions to the model memory.

Note the condition number next to the D (default) in

the display. This is the set of conditions that will be

copied into a new condition and modified. Also note

the number after the next display. You will copy to

this condition.

Use the Copy Condition

CPC

from the System

menu. This function copies the contents of one condi-

tion into another. Choose the default flight condition

number, press the SET button, then choose the second

condition number in the lower box "TO CONDI-

TION." Give the command to copy.

15.

Volume Setting

Some functions can have their mixing ratio vary

with the motion of another slider or knob: use the

VOL key O to get to this choice (for example, see

ADF). Move the selected control to determine how it

affects the mix. You can also add a time delay on

many of the menus: look for a DELAY setting.

16. Programmable Mixers

Up to five mixers are available in all flight condi-

tions. These may be used to enhance flight capabilities

or to correct bad tendencies by adjusting mixing from

one control to another. For example, you may use

Elevator->Flap coupling to tighten up the corners on

square loops, Throttle->Rudder coupling to correct

for torque tendencies, etc. There is no limit to the

number of corrections that can be made.

Your PCM 1024Z system is filled with powerful,

predefined mixing functions. Be sure to browse through

the various function menus in the Aircraft section follow-

ing this example.

The switch that calls the flight conditions should

be selected. Return to the Condition Select

CSL

function, press the desired flight condition number,

and use the SWT button to choose the desired switch

location. Once you have selected a condition, use the

CNA (Condition NAme) button to label the new con-

dition (you may have to flip the chosen switch to the

correct position to get the desired condition). Now,

you may go through the Condition menu items to get

the desired settings in the new mode. Read the condi-

tion name after the model name to be sure you are

changing the condition you want.

Airplane Section, Page 79

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba 9ZAP_part2 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info