Bedienungsanleitung Futaba FP8SSHP (Seite 4 von 36) (Englisch)

30098

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

•The

receiver

is a

miniature

PCM

receiver

which the highest reliability has been pursued.

It is the first R/C receiver in the world to use

the newest computer technology.

•Miniature

PCM

receiver

with

hi-speed

single-

chip microprocessor. Resistance against adja-

cent band and noise interference has been

increased by one full order of magnitude.

•Microprocessor-controlled servo hold function

eliminates erroneous operation when the

"dead

point"

area

entered.

•Microprocessor provides fail-safe

and battery

fail-safe functions for greater safety.

•Error

lamp

display

allows

checking

the

receiver operating state.

•DC-DC converter in the power supply im-

proves the low-voltage operation character-

istic.

•High

sensitivity design

with

amplifier

circuit.

•Ultra narrow-band ceramic filter and PCM

system are practically invulnerable to adjacent

band interference.

•Gold-plated connector pins eliminate poor

contact. Polarized housing increases reliability

against shock and vibration.

•DSC circuit. Each servo can be controlled

from the transmitter without turning on the

transmitter by connecting the transmitter

directly to the C terminal.

•New indirect-drive potentiometer improve

vibration and shock resistance and improves

neutral precision tremendously.

•Futaba low-power custom 1C provides high

starting torque, narrow dead band, and excel-

lent trackability.

•Fiberglass-reinforced PBT (polybutylene ter-

ephthalate) injection molded servo case is

mechanically strong and invulnerable to glow

fuel.

•Strong polyacetal resin ultra-precision servo

gear features smooth operation, positive neu-

tral, and very little backlash.

•Fiberglass-reinforced epoxy resin PC board

with thru-the-hole plating improves servo amp

vibration and shock resistance.

•Thick-film gold plated connector pins ensure

positive contact and greater reliability against

shock and vibration. The connector housing is

polarized to prevent reverse insertion.

•Six

special

adjustable splined horns

are

avail-

able.

•CONTENTS AND RATINGS

Ratings and specifications are subject to change without prior notice.

Model

Transmitter

Receiver

Servo

Switch

Nicd battery

Accessories

FP-8SSHP

FP-T8SSHP x 1 with module FP-TF-FM

FP-R118GPx 1

FP-S130x4

SWH-5 (R4-SWJ) x 1

NR-4Jx 1

Charger, extension cord, DSC cord (FSC-1), CHG adaptor, DSC-CHG cord, frequency

flag, spare horn, mounting screws, tachometer sensor (FTA-3)

Transmitter

FP-T8SSHP———————————— Receiver

FP-R118GP______________

Servo

FP-S130_________________

Operating system : Single-stick, 8 channels for Receiving frequency : 50/53MHz BANDSIChosen Control system -+pulse width control

helicopter 72/75MHz BANDS) band 1520uS.N

Transmitting frequency : 50/53MHZ BANDSIChosen Intermediate frequency : 455kHz Operating angle : One side 45"or more (in-

72/75MHz BANDS[band Power requirement . 4.8V Nicd battery (NR-4J- cluding trim)

53MHz • • 72MHz shared with servo) Power requirement : 4.8V (shared with receiver)

Frequency change to any Current drain : 42mA (at 4.8V reception) Current drain : 5mA (at idle)

of above bands Is possible Dimensions : 2.23 x 1.65 x 0.94 in Output torque : 55.6oz-in (4kg-cm)

by merely changing RF (57 x 42 x 24mm) Operating speed : 0.24sec/60°

module. Weight :1.85ozl53g) Dimensions : 1.52 x .77 x 1.36 in

Modulation : PCM (FM) Receiving range : 500m on the ground l38.5xl9.5x34.5mm)

Power requirement : 9.6V 8/500mAH internal 1000m in the air Weight :1.47oz(42gl

Nicd battery (NT.8H) When FP.T8SSHP used

Current drain : 250mA (at the best conditions)

Receiver and servo Nicd battery NR-4J_

Charger FBC-8B12L

Input voltage

Output

: 120VAC, 50/60H2.4VA

: Tx side 9.6V. 45mA

Rx side 4.8V. 45mA

Voltage

Dimensions

4.8V.4/500mAH

2.01

2.28

0.59

151 x 5 8 x 15mm)

: 3.350Z (95g)

Weight

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba FP8SSHP Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info