Bedienungsanleitung Futaba FX22 (Seite 68 von 174) (Englisch)

747921

Zoom out

Zoom in

Vorherige Seite

1/174

Nächste Seite

Model deletion

*The model stored in the transmitter memory or an SD card

can be deleted.

*The current model can not be deleted.

1. Move the cursor to the save destination

display ("TX" or "CARD") and touch the RTN

button to switch to the data input mode.

Select the save destination by scrolling the

touch sensor and touch the RTN button.

[TX]: Transmitter memory

[CARD]: SD card

2. Move the cursor to the model you want to

delete in the model list and then touch the

RTN button.

3. Move the cursor to [DELETE].

4. Touch the RTN button. When a conÀrmation

message is displayed and the RTN button

is touched for one second, the model is

deleted.

Model name change

*The model name of the model stored in the transmitter

memory or a SD card can be changed.

1. If changing the location:

Move the cursor to the save destination

display ("TX" or "CARD") and touch the RTN

button to switch to the data input mode.

Select the save destination by scrolling the

touch sensor and touch the RTN button.

[TX]: Transmitter memory

[CARD]: SD card

2. Move the cursor to the model you want to

change in the model list and then touch the

RTN button.

3. Move to [RENAME].

4. Touch the RTN button.

*The model name setup screen is displayed.

User name (candidate)

5. Change the model name as described

below:

[Moving cursor in the user name (candidate)]

Select [ł] or [ń], and touch the RTN button.

[Deleting a character]

When [DELETE] is selected and the RTN button

is touched, the character immediately after

the cursor is deleted.

[Adding a character]

When a character is selected from the

character list and the RTN button is touched,

that character is added at the position

immediately after the cursor.

*A name of up to 10 characters long can be entered as the

model name. (A space is also counted as one character.)

6. After the desired information has been input,

select [ENTER] and touch the RTN button.

(To terminate input and return to the original

state, select [CANCEL] and touch the RTN

button.)

Model copy

*A copy can be made of the model stored in the transmitter

memory or an SD card.

1. If changing the location:

Move the cursor to the save destination

display ("TX" or "CARD") and touch the RTN

button to switch to the data input mode.

Select the save destination by scrolling the

touch sensor and touch the RTN button.

[TX]: Transmitter memory

[CARD]: SD card

2. Select the model you want to copy in the

model list and then touch the RTN button.

3. Move to [COPY].

4. Touch the RTN button.

*The copy screen appears.

5. If replacing the model stored in the

transmitter memory:

Move to [ADD-LIST] and touch the RTN button

to switch to the data input mode.

Select the destination model by scrolling the

touch sensor and touch the RTN button.

[ADD-LIST]: adding the model to the list

[(model name)]: replacing the model

*The model stored in the SD card can be replaced.

If changing the location:

Move the cursor to the copy destination

display ("TX" or "CARD") and touch the RTN

button to switch to the data input mode.

Select the save destination by scrolling the

touch sensor and touch the RTN button.

6. Move to [COPY].

7. Touch the RTN button. When a conÀrmation

message is displayed and the RTN button is

touched for one second, the model data is

copied.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba FX22 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info