-19-
Trainer Function
The trainer function is a very effective way for training students. To use it, the special
trainer cord TC-FM (FUTM4410 USA only - sold separately) is necessary.
The special trainer cord can be connected to SKYSPORT4, SKYSPORT6, 7U series, 8U
series, and PCM1024Z series transmitters.
Connection
Connect the student and instructor
transmitters with the trainer cord.
Never turn on the student transmitter power switch.
Turning on the power switch will cause interference and a crash.
Set the student and instructor transmitter functions and trims to the same settings.
For example, if the direction of operation is reversed, control will be lost and the plane
will crash.
Both transmitters must have the modulation type that is FM type.
If the modulation type is different, control is impossible.
Stick Lever Spring Tension Adjustment
The operating feel of the aileron, elevator, and rudder sticks can be individually adjusted
by adjusting the stick spring tension.
1. Remove the four transmitter rear case screws
and carefully remove the rear case.
2. Adjust the spring tension by turning the screw
of the channel you want to adjust (clockwise to
stiffen counter-clockwise to soften).
3. Close the rear case and tighten the four
screws.
Operating Instructions
Instructor side: Turn "on" the power switch and extend the antenna to its full length.
When the trainer switch is not activated, the instructor has control. When the trainer
switch is activated, control is transferred to the student. Release the switch to retain
control.
Student side: Never turn on the power switch.
