Bedienungsanleitung Gaggenau BMP224100 (Seite 16 von 36) (Englisch)

512130

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Automatic programmes

The automatic programmes allow you to prepare food

very easily. You select the programme and enter the

weight of your food. The automatic programme makes

the optimum setting. You can select from 10

programmes.

Setting a programme

1 Set the function selector to any operation mode.

Note: The function selector must not be moved to

ž or S.

2 Touch the i "Chef's hat" symbol; the automatic

programmes are displayed.

3 Press ™ to confirm.

The first programme appears in the display.

4 Use the rotary selector to select the required

programme, e.g. Cooking: "Fresh vegetables".

5 Touch % to select the n "Weight" function.

6 Turn the rotary selector to set the weight.

7 Press ™ to confirm.

8 Press I to start.

The operation begins. The cooking time starts

counting down.

An audible signal sounds once the cooking time has

elapsed. The signal stops early if you touch the ™

symbol, open the appliance door, or set the function

selector to 0. The programme has finished.

Resting time:

Some dishes require a resting time after the end of the

programme in order to reach an even temperature or to

simmer. Wait until the resting time has elapsed before

removing the food from the appliance.

Tips:

Touch * to view tips on ovenware, accessories and

shelf position. Exit this display using the ™ symbol.

Note:

Use ( to view notes on preparation. The ) symbol

appears for important information and indicates that an

action is required. Exit this display using the ™ symbol.

For some dishes, the display provides instructions for

turning or stirring during preparation. Follow the

information provided. Opening the appliance door

pauses the operation. After closing the appliance door,

continue the operation by pressing I . If you do not turn

or stir the dish, the programme runs as normal until it

reaches the end.

Pause:

The operation can be paused using the H symbol. Use

the I symbol to continue.

Switching off:

To stop the operation and cancel the settings, turn the

function selector to 0.

Notes on the automatic programmes

Place the food in the cold oven.

Take the food out of its packaging and weigh it. If it is

not possible to enter the exact weight, you should round

it up or down.

For the programmes, always use microwave-proof

cookware, e.g.made of glass or ceramic. Observe the

accessories tips in the programme table.

A table of suitable types of food with appropriate weight

ranges and the accessories required can be found in

the section after the tips.

It is not possible to set a weight outside the weight

range.

With many dishes, a signal sounds after a certain time.

Turn or stir the food.

Defrosting:

▯ As far as possible, freeze and store food flat and in

portion-sized quantities at -18 °C.

▯ Place the frozen food on a flat ovenproof dish,

e.g. a glass or porcelain plate.

$XWRPDWLFSURJUDPPHV

)UHVKYHJHWDEOHV

KNJ





PLQ

VHF



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau BMP224100 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BMP224100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info