Bedienungsanleitung Gaggenau BSP270111 (Seite 15 von 56) (Englisch)

755787

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Water filter

3Using the rotary selector, set the measured water

hardness. The value 12is set by default.

4Press ™ to confirm.

Ending initial set-up

"Initial set-up complete" will appear on the display.

Confirm with ™.

The appliance will switch to standby mode and the

standby display will appear. The appliance is now ready

to use.

Cleaning the door panel

The door seal has been greased in the factory to make it

leaktight. There may be traces of grease left on the door

panel.

Clean the door panel with glass cleaner and a window

cloth or microfibre cloth before using the appliance for

the first time. Do not use glass scrapers.

Cleaning accessories

Before using the accessories for the first time, clean

them thoroughly using hot detergent solution and a soft

cloth.

Heating up the appliance

Make sure that there is no leftover packaging in the

cooking compartment.

To eliminate the new-appliance smell, heat up the empty

appliance with the door closed. One hour with hot air H

+ 60% humidity at 200 °C is ideal for this.

Water filter

Operation with or without a water

filter

You can use the appliance with or without a water filter.

If the water hardness exceeds 7°dH or carbonate

hardness 5°dH, we recommend the installation of the

descaling system GF 111 100.

Changing the water filter

Filter cartridges should be replaced regularly.

Replacement cartridges are available from after-sales

service or in the online shop (order number

GF 121 110).

The capacity of the filter cartridge depends on the

frequency of use of the appliance and your regional

water hardness. A message will appear in the display to

remind you when the filter needs to be replaced.

Regardless of the actual amount of water filtered the

filter cartridge needs to be changed after 12 months at

the latest.

1Set the function selector to S. Select "Water filter

change" using the rotary selector.

2The œ symbol is displayed. Confirm with ™.

3Change the water filter cartridge. Refer to the

instructions included with the filter cartridge.

Confirm with ™.

4"Water filter capacity" is shown in the display.

Confirm with ™.

5Turn the rotary selector to select the capacity of the

filter cartridge (between 100- 9000 litres). Confirm

with ™.

The water filter change is complete. Confirm with ™.

The appliance is now ready for operation.

Activating the appliance en

9

Activating the appliance

Activati ng the appliance

Standby

The appliance switches to standby mode if no function

is set or the childproof lock is activated.

The brightness of the control panel is dimmed in

standby mode.

Notes

– Different displays can be shown in standby mode.

The default setting is the GAGGENAU logo and the

time. You can adjust the display using the "Standby

screen" setting in the basic settings. ~ "Basic

settings" on page 31

– The brightness of the display depends on the

vertical viewing angle. You can adjust the display

using the "Brightness" setting in the basic settings.

Activating the appliance

To exit standby mode, you can either

▯Turn the function selector,

▯Touch a control panel,

▯Open or close the door.

You can now set the desired function. You can read

about how to set functions in the respective chapters.

Notes

– When "Standby screen = off" is selected in the

basic settings, you must turn the function selector

to exit standby mode.

– The appliance returns to the standby screen if you

have not made any settings for a long time after

activation.

– When the door is open, the interior lighting

switches off after a short time.

Operating the appliance

Operati ng the appliance

Cooking compartment

The cooking compartment has three rack levels. The

rack levels are counted from the bottom up.

Note: When steaming, defrosting, dough proving and

reheating, you can use up to three rack levels at a time.

Only one level can be used for baking; level 2is

designated for this (or level 1for deep baking tins). For

very small baked goods, you can also use two levels,

e.g. level 1and level 3.

Caution!

– Do not place anything directly on the cooking

compartment floor. Do not cover it with aluminium

foil. A build-up of heat may damage the appliance.

The cooking compartment floor must always be kept

clear. Always place cookware in the perforated

cooking container or on the wire rack.

– Do not slide any accessories between the wire rack

rails, or they may tilt.

Always fully open the appliance door to the stop. In this

position, the open door will not swing back by itself.







Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau BSP270111 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BSP270111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info