Bedienungsanleitung Gaggenau BSP270111 (Seite 19 von 56) (Englisch)

755787

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Time-setting options

The timer menu closes and the time begins to count

down. The Š symbol and the countdown appear in the

display.

A signal sounds once the time has elapsed. Touch the

™ symbol to silence.

You can exit the timer menu at any time by pressing the

' symbol. This erases the settings.

To stop the timer:

Call up timer menu. Touch C to select the "Timer" Š

function and touch the H symbol. To allow the timer to

continue counting down, touch the symbol I.

Switching off the timer early:

Call up timer menu. Touch C to select the "Timer" Š

function and touch the Ž symbol.

Stopwatch

The stopwatch runs independently of the other

appliance functions.

The stopwatch counts from 0seconds up to 90 minutes.

It also has a pause function, which enables you to

temporarily stop the clock.

Starting the stopwatch

1 Call up the timer menu.

2 Touch C to select the p "Stopwatch" function.

3 Touch I to start.

The timer menu is closed and the timing begins. The p

symbol and the elapsed time are shown in the display.

Pausing and restarting the stopwatch

1 Call up the timer menu.

2 Touch C to select the p "Stopwatch" function.

3 Touch the H symbol.

The time stops. The symbol changes to I Start.

4Touch I to start.

The time continues to run. When 90minutes is reached,

the display pulsates and signal sounds. The signal stops

when you touch the ™ symbol. The p symbol on the

display goes out. The process has finished.

To switch off the stopwatch:

Call up the timer menu. Touch C to select the p

"Stopwatch" function and touch the Ž symbol.

Cooking time

If you set a cooking time for your meal, the appliance

switches off heating automatically after the selected

time.

You can set a cooking time from 1 minute to 23 hours

59 minutes.

Setting the cooking time

You have set the type of heating and temperature and

placed your food in the cooking compartment.

1Touch the M symbol.

2Use C to select the 6 "Cooking time" function.



6WRSZDWFK





6WRSZDWFK



Time-setting options en

3Set the required cooking time using the rotary

selector.

4Press I to start.

The appliance starts. The Timer menu closes. The

display shows the temperature, operating mode,

remaining cooking time and cooking time end.

One minute before the end of the cooking time, the

elapsed cooking time is shown enlarged on the display.

Once the cooking time has elapsed, the appliance

switches off. The 6 symbol flashes and an audible

signal sounds. The signal stops early if you touch the ™

symbol, open the appliance door, or set the function

selector to 0.

Changing the cooking time:

Call up the Timer menu. Use C to select the 6

"Cooking time" function. Use the rotary selector to

change the cooking time. Press I to start.

To cancel the cooking time:

Call up the Timer menu. Use C to select the 6

"Cooking time" function. Cancel the cooking time

with Ž. Press ' to return to normal operation.

To cancel the entire procedure:

Set the function selector to 0.

Note: You can also change the type of heating and

temperature while the cooking time elapses.

End of cooking time

You can delay the cooking time end to a later time.

Example: it is 14:00. The dish requires a cooking time of

40minutes. You want it to be ready at 15:30.

Enter the cooking time and delay the cooking time end

until 15:30. The electronics system calculates the start

time. The appliance starts automatically at 14:50and

switches off at 15:30.

Bear in mind that food which spoils easily should not be

left in the cooking compartment for too long.

Delaying the cooking time end

You have set the type of heating, temperature and

cooking time.

1Touch the M symbol.

2Use C to select the 5 "Cooking time end" function.

3Set the required cooking time end using the rotary

selector.

4Press I to start.

The appliance switches to standby. The display shows

the operating mode, temperature, cooking time and

cooking time end. The appliance starts at the calculated

time and automatically switches off once the cooking

time has elapsed.

Note: If the 6 symbol flashes, you have not set a

cooking time. Always begin by setting a cooking time.

Once the cooking time has elapsed, the appliance

switches off. The 5 symbol flashes and an audible

signal sounds. The signal stops early if you touch the ™

symbol, open the appliance door or set the function

selector to 0.

Changing the cooking time end:

Call up the Timer menu. Use C to select the 5

"Cooking time end" function. Set the required cooking

time end using the rotary selector. Press I to start.

&RRNLQJWLPH

&RRNLQJWLPHHQG





Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau BSP270111 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BSP270111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info