Bedienungsanleitung Gaggenau ce 492 (Seite 20 von 24) (Englisch)

332143

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

activation of the cooking zone extension will not be

ecorded.

If you store a memory event for the roasting zone,

irst select either of the right cooking zones.

Activate the roasting zone extension within

30 seconds after selecting the cooking zone.

The automatic quick boil function cannot be

activated for memory cooking.

The automatic switch off (holiday safeguard) can

also be activated while using memory cooking.

Changing the setting

If you want to store a different memory event for a

cooking zone, make a new recording. The old

memory is erased.

Calling up the memory

If you want to cook a dish again for which the

setting has been recorded, call up the memory.

The hob must be switched on.The cooking zone for

which the memory function is to be activated must

be switched off.

1 Select the required cooking zone with the twist

knob.

2 Touch the M symbol to activate the memory.

The stored settings appear in the cooking zone

display in quick succession. The cooking zone does

not heat up yet. The M symbol next to the cooking

zone display lights up. Each individual step appears

in the display for 3 seconds. The respective

cooking times appear in the timer display.

After all the steps have been displayed, the memory

program starts. The cooking zone heats up. The

current setting is displayed in the cooking zone

display. The duration of the whole cooking event

counts do

wn in t

he timer displa

If y

ou w

ant t

o call up t

he memory event for the

oas

ting zone, fir

t select t

he cooking zone on the

right that you used to store the memory event. The

emaining right cooking zone mus

t be switc

hed off.

Then t

ouch t

M symbol.

Displaying the memory

ou can call up the remaining heat settings and the

respective cooking times while the memory program

is running.

1 Select the cooking zone with the twist knob.

2 Touch the W symbol to display the current heat

setting and duration. You can now call up all

the remaining heat settings and the respective

durations using the W symbol.

Memory ends

When the memory program has finished, the

cooking zone switches off. A signal sounds for

3 minutes.

00 flashes in the timer display. The

M symbol flashes next to the cooking zone display.

0 lights up in the cooking zone display. Touch any

control panel. The displays disappear and the

signal stops.

Ending t

he memory prematurely

Select the cooking zone with the twist knob. The

cooking zone display flashes. Change the heat

setting. The memory operation is ended. The

cooking zone switches off.

Several cooking zones in memory

operation

If you want to use the memory function on several

cooking zones at the same time, the shortest

duration of the memory pr

ograms is displayed in the

timer display.

If you w

ould lik

e t

o call up t

he dur

ation of another

memory program: Select the cooking zone with the

twis

t knob. The current setting is displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau ce 492 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau ce 492

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info