Bedienungsanleitung Gaggenau CE291101 (Seite 11 von 16) (Englisch)

761871

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Safety switch-off en

2. Within the next 10seconds set the required cooking

time on the control panel.

aThe cooking time counts down. If you have set a

cooking time for more than one hotplate, the cook-

ing time of the hotplate selected is displayed.

aWhen the cooking time has elapsed, the hotplate

switches off. A signal sounds and flashes on the

display for 10seconds. The display lights up

brightly.

Changing or cancelling the cooking time

1. Select the hotplate.

2. Touch ⁠.

aThe display lights up brightly.

3. On the control panel change the cooking time or set

it to ⁠ ⁠.

Switching off the continuous signal

You can switch the signal off manually.

▶Touch any symbol.

aThe displays will go out and the audible signal will

stop.

Automatic timer

You can use this function to preselect a cooking time

for all hotplates. Each time a hotplate is switched on,

the preselected cooking time counts down. When the

cooking time has elapsed, the hotplate switches off

automatically.

Switch on the automatic timer in the basic settings.

→Page12

Tip:The automatic timer is valid for all hotplates. You

can reduce or delete the cooking time for individual

hotplates. →Page10

9.2 Kitchen timer

You can set a time of up to 99 minutes after which a

signal will then sound. The kitchen timer runs inde-

pendently of all other settings.

Setting the kitchen timer

1. Switch on the kitchen timer.

There are 2 different ways of switching the kitchen

timer on.

If a hotplate has been

selected.

Touch twice within

10seconds.

If a hotplate has not

been selected.

Touch ⁠.

aThe indicator lights up.

2. Within the next 10seconds set the required time on

the control panel.

aThe time counts down.

aWhen the time has elapsed, a signal sounds.

lights up on the timer display. The indicator for

the kitchen timer lights up brightly. It switches off

after 10seconds.

Displaying the time

▶Select the kitchen timer with .

aThe time is displayed for 10seconds.

Setting the correct time

1. Select the kitchen timer with .

2. Set the required time on the control panel.

10 Safety switch-off

If you do not change the settings of a hotplate for a

long time, safety switch-off will be activated.

When the hotplate switches off depends on the heat

setting selected (1to 10hours).

The hotplate stops heating. and the residual heat in-

dicator ⁠/ flash alternately on the hotplate display.

10.1 Overriding safety switch-off

1. Touch any control.

aThe display goes out.

2. Reset.

11 Wipe protection

Wiping over the control panel while the hob is switched

on may alter settings. Your hob has a wipe protection

function to prevent this.

The main switch is excluded from the wipe protection

function. You can switch the hob off at any time.

11.1 Activating wipe protection

▶Touch .

aA signal will sound.

aThe indicator lamp above lights up.

aThe control panel is locked for 30seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CE291101 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CE291101

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info