Bedienungsanleitung Gaggenau CI292102 (Seite 19 von 60) (Englisch)

761566

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Transfer function

Transfer function

Transfer functi on

You can use this function to transfer the power level, set

cooking time and selected cooking sensor function from

one cooking zone to another.

To transfer the settings, move the cookware from the

cooking zone that is switched on to another cooking

zone.

This function can also be used on the flexible cooking

zones.

Note: You can find additional information on the correct

positioning of the cookware in the section on ~ "Flex

function"

1Remove any cookware from the hob.

The hotplate display starts flashing. The hotplate

does not heat up.

2Set the cookware down on a flexible hotplate within

the next 90 seconds. The new hotplate is detected

and the ˆ symbol lights up. The heat setting that

has been applied flashes in the hotplate display.

3Select the new hotplate within 90 seconds using

the twist knob. The setting has been transferred.

Notes

– Move the cookware to a cooking zone that is not

switched on, that you have not yet preset or on

which no other cookware has been placed

previously.

– If the Flex function is activated by moving an item of

cookware across the flexible cooking zone, the

settings are automatically applied.

– The booster functions can only be moved from left

to right or from right to left when none of the

cooking zones are active.

– If a new item of cookware is set down on a different

cooking zone before the settings have been

confirmed, this function will be ready for both

cooking vessels. Confirm the required cooking

zone.

– If you move more than one item of cookware, the

function is only ready to use for the item of

cookware that was last moved.

– When you place the cookware back in this position,

the same settings is used.

Y| [|

Professional cooking mode en

Professional cooking mode

You can use the professional chef function to display

the preset heat settings for each hotplate. Set down a

suitable item of cookware within 9.5 minutes to apply

the default value.

Activation

1Switch on the hob.

2Touch the ¬ symbol.

The preset power levels light up in the cooking

zone displays.

3Place suitable cookware within eight minutes. Once

the cookware has been detected, the

corresponding cooking zone is selected. You can

adjust the power level using the twist knob.

The power level indicators for the unoccupied

cooking zones start flashing if the adjustment time

has elapsed.

4Touch the ¬ symbol again within 90 seconds to

extend the professional chef function. If the symbol

is not touched, the unused cooking zones are

switched off.

Notes

– The keep-warm function can also be set in

professional chef mode.

– If you place unsuitable cookware (e.g. aluminium

cookware), the display for the power levels flashes

until the cookware is removed again. To check

whether your cookware is suitable for induction

cooking, refer to the section entitled ~ "Cookware

check"

Deactivating

To end the function immediately: Touch the ¬ symbol.

Switch all hotplates to heat setting ‹. The ¬ symbol

lights up white.

Function ends automatically: If no suitable cookware

is set down after 8 minutes have elapsed, the ¬ symbol

and the corresponding hotplate displays start flashing

for 90 seconds. Touch the ¬ symbol twice to switch off

the function.

If you do not touch the ¬ symbol, the professional chef

function switches off automatically after 90 seconds.

The ¬ symbol lights up white and unoccupied hotplates

switch to heat setting ‹. Hotplates that are in use retain

the original heat setting.

Changing the settings

You can change the default settings in the "Basic

settings" menu. See the section entitled ~ "Basic

settings"

Y| [|

Ü

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CI292102 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CI292102

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info