Bedienungsanleitung Gaggenau CI292102 (Seite 21 von 60) (Englisch)

761566

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Timer functions

Timer functions

Timer functi ons

Your hob has three timer functions:

▯Cooking timer

▯Timer

▯Stopwatch function

Cooking timer

The hotplate automatically switches off after the time

that is set has elapsed.

You can set a time of up to 99 minutes. The time elapses

in the timer display in minutes and the final half a minute

is displayed in seconds.

Setting procedure:

1Select the hotplate and the required heat setting.

2Touch the 6 symbol. The 6 display for the hotplate

lights up. ‹‹ lights up on the timer display.

3Use the twist knob to select the required cooking

time.

The cooking time begins to elapse.

Note: If the flexible cooking zone is selected as the only

hotplate, the set time for the entire cooking zone is the

same.

Frying sensor technology for pans/cooking sensor

If you set a cooking time for a cooking zone with

activated frying sensor technology or activated cooking

sensor, the cooking time begins to count down

immediately and not just once the selected temperature

level has been reached.

Changing or deleting the time

Select the hotplate and then touch the 6 symbol.

Change the cooking time using the twist knob or set to

‹‹ to delete it.

When the time has elapsed

The hotplate switches off. A signal sounds, ‹ appears

in the hotplate display and ‹‹ flashes in the timer

display. Touch any symbol or press the twist knob; the

displays go out and the audible signal ceases.

Notes

– If a cooking time has been programmed for several

hotplates, the cooking time that ends first will

appear in the timer display. The 6 indicator for the

hotplate lights up orange.

– Select the relevant hotplate to call up the remaining

cooking time for a hotplate. The cooking time will

appear for 10 seconds.

The short-term timer

You can use the short-term timer to set a time of up to

99 minutes.

This works independently from the hotplates and from

other settings. This function does not automatically

switch off a hotplate.

How to activate the function

1Touch the Š symbol; ‹‹ appears in the timer

display.

2Select the required time using the twist knob.

3Touch the Š symbol again to confirm the selected

time.

The cooking time begins to elapse.

Changing or deleting the time

Touch the Š symbol and use the twist knob to change

the time or set it to ‹‹.

Â



Â



Booster function for pots en

When the time has elapsed

A signal sounds for three minutes. ‹‹ flashes in the

timer display. Touch the Š symbol again: The displays

go out and the audible signal ceases.

Timer plus

If you press and hold the symbol Š for a few seconds

before the audible signal ceases, the stopwatch is

activated.

The display for the stopwatch shows the elapsed time

since the end of the set timer time. The time that was

previously set flashes in the timer display.

Press and hold the Š symbol for a few seconds. This

stops the stopwatch, and the indicators go out.

The function has been deactivated.

Stopwatch function

The stopwatch shows the cooking time that has elapsed

so far in minutes and seconds (mm.ss). The maximum

duration is 99 minutes and 59 seconds (99.59). If this

value is reached, the display starts again at 00.00.

The stopwatch works independently of the hotplates and

other settings. This function does not automatically

switch off a hotplate.

Activating

Touch the ® symbol. ‹‹.‹‹ appears in the stopwatch

display.

The time begins to elapse.

Deactivating

Touching the ® symbol stops the stopwatch function.

The stopwatch displays remain lit.

If you touch the ® symbol again while it is still orange,

the time will continue to elapse.

If you touch and hold the ® symbol, the displays will go

out.

The function is deactivated.

Booster function for pots

Booster functi on for pots

This function allows large volumes of water to be heated

up even more quickly than with power setting Š. The

saucepan booster function temporarily increases the

maximum output of the selected hotplate.

This function can always be activated for a hotplate,

provided the other hotplate in the same group is not in

use (see illustration).

Note: The booster function can also be activated on the

flexible cooking zone if this is being used as a single

hotplate.

Activating

1Select the hotplate.

2Touch the Ž symbol.

The ˜ indicator lights up.

The function has now been activated.

Deactivating

1Select the hotplate.

2Touch the Ž symbol, turn the twist knob or select a

different function.

The ˜ indicator goes out and the hotplate switches

back to the Š heat setting.

The function is deactivated.

Notes

– In certain circumstances, this function may switch

itself off automatically in order to protect the

electronic elements inside the hob.

– If a heat setting was set before activating function,

this setting will be automatically applied again after

deactivating the function.





Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CI292102 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CI292102

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info