Bedienungsanleitung Gaggenau CI292102 (Seite 49 von 60) (Englisch)

761566

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Hood connection

Connecting appliances via your home network

If the appliances are connected to each other via your

home network, both the hood controls and Home

Connect can be used to operate the hob.

Notes

– Make sure you follow the safety instructions in the

instruction manual for your extractor hood and that

these are complied with even when operating the

appliance via the hood controls on the

hob.~ "Important safety information" on page 6

– If the appliance is being operated by means of the

controls on the extractor hood, this mode of

operation always has priority. It is not possible to

use the hood controls on the hob during this time.

– In networked standby mode, your appliance

requires a maximum of 2 W.

Setting up

To set up the connection between the hob and cooker

hood, the hob must be switched on.

Connecting directly

Make sure that the extractor hood is switched off.

For more information, refer to the section entitled

"Connecting to the hob" in the instruction manual for

your extractor hood.

Note: If you connect your hob directly to the extractor

hood, it cannot be connected to your home network as

well and you will not be able to use Home Connect.

1Open the basic settings.

2Touch the t symbol repeatedly until the ™“

setting appears.

‹”” will be lit on the hotplate display.

3Set the value to ‚ using the twist knob.

‚ will flash on the hotplate display.

4You have 2 minutes to initiate the connection

process on the extractor hood.

Once the hob is connected to the extractor hood, the

value ‹¯ appears on the hotplate display. The symbols

for the hood controls on the hob are displayed on the

hob's control panel.

Connecting via your home network

You require a router that has WPS functionality.

You require access to your router.If you do not have this,

follow the steps for "Direct connection".

When you begin, make sure that the extractor hood is on

your home network.

1Open the basic settings.

2Touch the t symbol repeatedly until the ™“

setting appears.

‹”” will be lit on the hotplate display.

3Set the value to ‚ using the twist knob.

‚ will flash on the hotplate display.

4Press the WPS button on the router within the next

2 minutes.

The hob will be connected to your home network

and the value ƒ will appear on the hotplate display.

5Initiate the process for connecting to the extractor

hood.

Once the hob is connected to the extractor hood, the

value ‹¯ appears on the hotplate display. The symbols

for the hood controls on the hob are displayed on the

hob's control panel.

Note: Connection can only be established when both

appliances are connected to your home network and the

connection process has been initiated for both of them.

If the connection process has already timed out for one

of the two appliances, try to connect again (basic

settings, ™“ setting).

Resetting connection

You can reset the connections you have saved for your

home network and extractor hood at any time.

1Open the basic settings.

2Touch the t symbol repeatedly until the ™“

setting appears.

3Set the value to ‹”” using the twist knob.

Hood connection en

Control the hood via the hob

In the basic settings of your hob you can adjust the

behaviour of your extractor hood depending on the

switch-on/off of the hob or individual cooking zones.

~ "Hood control settings" on page 49

You can select other settings using the control panel.

Setting the fan

Switching on

Touch the } symbol.

Setting fan level

Turn the twist knob clockwise or anti-clockwise to adjust

the fan setting.

The following settings are possible:

Switching off

To switch the fan off and continue cooking:

1Touch the } symbol.

2Use the twist knob to select the fan setting ‹.

To switch off the hob:

How the fan behaves once the hob is switched off

depends on the basic setting you have selected.

If the ¥ symbol is displayed, the fan is in run-on mode.

Note: Even once the hob and fan have been switched

off, the E symbol will still be faintly visible.

Setting the hood lighting

You can switch the hood light on and off via the hob's

control panel.

Touch the ž symbol.

Depending on the basic settings you have selected, the

light will automatically be switched on or off when the

hob is switched on or off. ~ "Hood control settings"

Hood control settings

You can adapt the hood controls to suit your needs at

any time.

Changing the basic settings ~ "Basic settings"

Note: The ™‘, ™›, ™™ and ™š settings are only

displayed if the appliance is connected to an extractor

hood.

Indicator/

symbol

Function

‹Fan off

‘Automatic mode

The fan starts automatically when steam is pro-

duced

‚, ƒ, „Fan settings

Intensity: Low, medium, high

˜PowerBoost function

»Intermittent ventilation

¥Fan run-on

Indicator/

symbol

Function

™“ Hob-to-hood connection

‹”” Not connected*/disconnect.

‚Connect.

ƒConnected to home network.

‹¯ Connected to extractor hood.

™‘ Automatic fan switch-on

‹”” Switched off.

The hood will need to be switched on man-

ually if required.

‘Switched on in automatic mode.*

In automatic mode, the hood switches

itself on when you switch on one of the

cooking zones.

‚Switched on in manual mode.

The hood switches itself on at the lowest

setting when one of the cooking zones is

switched on.

ƒSwitched on in manual mode.

The hood switches itself on at a medium

setting when one of the cooking zones is

switched on.

„Switched on in manual mode.

The hood switches itself on at the highest

setting when one of the cooking zones is

switched on.

™› Fan run-on

‹”” The fan switches itself off when the hob is

switched off.

‘Switched on in automatic mode.*

‹¯ Switched on with standard fan run-on.

¯‹ Settings cannot be changed.

™™ Switch light on automatically

‹”” Switched off.*

‹¯ Switched on.

The light switches itself on when you

switch on the hob.

™š Switch light off automatically

‹”” Switched off.*

‹¯ Switched on.

The light switches itself off when you

switch off the hob.

* Basic setting

Gaggenau CI292102 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CI292102

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info