Bedienungsanleitung Gaggenau CV282 (Seite 15 von 52) (Englisch)

702999

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Operating the appliance

Operati ng the appliance

This chapter explains how to set a hotplate. The table

shows heat settings and cooking times for various

meals.

m Warning – Risk of burns!

The filter cover will get very hot very quickly if left on the

hob. Never place the filter cover on the hob.Do not

place pots, pans or other hot objects on the filter cover.

Note: Switch on the ventilation system when you start

cooking and switch it off again a few minutes after you

have finished cooking. This is the most effective way of

removing steam from the kitchen.

Note: Never use the appliance without the container,

metal grease filter or filter cover.

Switching the hob on and off

Switch the hob on and off using the main switch.

To switch on: Position the twist knob on the control

panel. Touch the # symbol. The symbols for the

hotplates and the functions available at this time light

up. ‹ lights up next to the hotplates. The hob is ready

for use.

To switch off: Touch the # symbol until the display

goes out. All hotplates are switched off. The residual

heat indicator remains lit until the hotplates have cooled

down sufficiently.

Notes

– The hob will switch itself off automatically if all the

hotplates have been switched off for more than

20seconds and the ventilation system is switched

off.

– The selected settings are stored for 5 seconds after

the hob has been switched off.

If the hob is switched back on during this time, the

heat settings that were previously set will flash. To

apply these settings, tap on the twist knob within

the next 5 seconds.

If you do not tap the twist knob or you touch a

different sensor button, all the previous settings will

be deleted.

Setting a hotplate

Set the required hotplate using the twist knob.

Heat setting 1= lowest setting.

Heat setting 9= highest setting.

Every heat setting has an intermediate setting. This is

shown in the hotplate display as .5.

Notes

– To protect the fragile parts of your appliance from

overheating and electrical overloading, the hob may

temporarily reduce the power.

– In order to prevent the appliance from producing

excess noise, the hob may temporarily reduce the

power.

Selecting a hotplate and heat setting

The hob must be switched on.

1 Select the hotplate. To do this, touch the twist knob

in the appropriate area for the required hotplate.

2 Within the next 10seconds, turn the twist knob until

the required heat setting appears in the heat setting

display.

The heat setting is set.

Notes

– When placing an item of cookware on the flexible

cooking zone, it must be positioned correctly

according to size; see the section entitled ~ "Flex

function"

The cookware is detected and the hotplate is

selected automatically. You can now configure the

settings.

– If the indicators flash after you have changed the

settings, check whether the cookware is suitable for

induction cooking. See the section entitled

~ "Cookware test".

Changing the heat setting

Select the hotplate and change the heat setting using

the twist knob.

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CV282 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CV282

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info