Bedienungsanleitung Gaggenau CX480110 (Seite 17 von 20) (Englisch)

761931

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Demo mode

If the °symbol appears in the display, the demo

mode is activated. The appliance does not heat up.

Disconnect the appliance from the power supply. Wait

a few seconds and reconnect it. Then switch off the

Demo mode in the Options menu within the first 3

minutes.

Info button

With the Info button, you can request important

additional information on the function currently being

used. To call up the information, touch the † display

area. The information appears. To close the

Information, touch the G display area.

Normal operating noise of the

cooktop

Induction technology is based on the generation of

electromagnetic fields. These allow heat to be

generated directly on the base of the cookware. Pots

or pans can cause different noises or vibrations

depending on the manufacturing method. These

noises are described as follows:

Deep buzzing (as from a transformer)

This noise occurs when cooking on higher power

levels. It is due to the volume of energy transferred

from the cooktop to the cookware. The noise stops or

reduces when the power level is reduced.

Low whistling

This noise occurs if the cooking container is empty. It

stops when water or food is placed in the container.

Crackling

This noise occurs with cookware made of different

multilayer materials. It occurs because of vibrations at

the areas at which the different materials contact each

other. The noise occurs on the cookware and can vary

according to the volume and preparation method of

the food.

An audible signal sounds if there is an object on the touch

display.

Remove the object and acknowledge the indicator on the

display. You can now reset the hob.

The cookware is not detected. The cookware is outside the appropriate size. Sizes with a

diameter of 90 to 340 mm are suitable.

There may be liquid under the cookware. Ensure that the

base of the cookware is dry.

The cookware may not be suitable for induction cooking.

The hob switches off automatically If no hotplate is in operation on the hob and you do not

change the settings for a prolonged period of time, the hob

will automatically switch off.

The hotplate cannot be adjusted. Only 2 hotplates can be in operation on each side of the hob.

An item of cookware in the centre of the hob occupies one

hotplate on each side of the hob. You can only set one other

hotplate for each side of the hob.

The cookware may not be suitable for induction cooking.

The hotplate settings are not transferred when the cookware

is moved.

Move the cooking container more slowly over the hob or use

the transfer function.

The hob responds unusually or can no longer be operated

correctly.

Disconnect the appliance from the power supply. Wait a few

seconds and reconnect it.

Problem Remedy







,QIRUPDWLRQ

7RFKDQJHWKHSRZHUOHYHOWRXFKWKHQXPEHUVDQG

VOLGH\RXUILQJHUXSRUGRZQ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CX480110 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info