Bedienungsanleitung Gaggenau DF250141 (Seite 26 von 34) (Englisch)

762099

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Fault, what to do?

Food remnants on the utensils. Utensils placed too closely together,

utensils basket overfilled.

Arrange utensils with adequate clearance

between them ensuring that the spray jets can

reach the surface of the utensils. Prevent con-

tact points.

Spray arm rotation obstructed. Arrange utensils so that the spray arm can

rotate without obstruction.

Spray arm nozzles are blocked. Clean the spray arm nozzles,

(see “Cleaning and maintenance”).

Filters 1j dirty. Clean filters (see “Cleaning and mainte-

nance”).

Filters 1j inserted incorrectly and/or

not engaged.

Insert and engage filters correctly.

Rinse programme too weak. Select a more intensive rinse programme.

Utensils precleaned too intensely; sen-

sors therefore decide on weak pro-

gramme sequence. Stubborn soiling

cannot be completely removed.

Do not prerinse utensils. Remove only large

food remnants.

Recommended programme Eco 50° or Inten-

sive.

Tall narrow receptacles in corner areas

are not rinsed adequately.

Do not place hollow receptacles too obliquely

and do not place in the corner area.

Top basket 12 on right and left not

set to same height.

Set top basket to same height using side

levers.

Detergent residue. Detergent dispenser cover blocked by

utensils and therefore does not open

fully.

Detergent dispenser cover must not be

obstructed by utensils.

Do not place utensils or fragrance dispenser in

the tablet collecting tray.

Detergent dispenser cover blocked by

the tablet.

Tablet must be inserted flat and not upright.

Tablets used in the quick or short pro-

gramme.

Dissolving time of the detergent is not

reached in the selected short pro-

gramme.

Dissolving time of tablets too long for a quick

or short programme.

Use a detergent powder or select a more inten-

sive programme.

Washing effect and dissolving perfor-

mance are reduced after a prolonged

storage time or detergent is very lumpy.

Change detergent.

Water stains on plastic parts. Droplet formation on plastic surface is

physically unavoidable. After drying,

water stains are visible.

Use a more intensive programme (more water

changes).

Arrange utensils in a sloping position.

Use rinse aid.

If required, increase softening setting.

Washable or water-soluble coat-

ings in the container or on the

door.

Detergent substances are deposited.

These coatings cannot usually be

removed with chemicals (appliance

cleaner, ...).

Change detergent brand.

Clean appliance mechanically.

If there is a “white coating” on the con-

tainer floor, the water softening system

has been set marginally.

Increase softening setting and change deter-

gent if required.

Salt dispenser cover 1b not closed. Close salt dispenser cover correctly.

Only for glasses: Initial glass corrosion

– can only apparently be wiped off.

See “Glass and utensil damage”.

Fault Cause Remedial action

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau DF250141 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info