762099
31
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
31
Installation and connection
Warm water connection *
Warm water connection
* depending on model
The dishwasher can be connected to cold or hot water
up to max. 60 °C.
Connection to hot water is recommended if the hot
water can be supplied by energetically favourable
means and from a suitable installation, e.g. solar
heating system with circulation line.
This will save energy and time.
The hot water setting :‹‚ allows you to adjust your
appliance optimally to operation with hot water.
It is recommended to have a water temperature
(temperature of the incoming water) of at least 40 °C
and no more than 60 °C.
It is not recommended to connect the appliance to hot
water if the water is supplied from an electric boiler.
Setting hot water:
1Open the door.
2Switch on ON/OFF switch (.
3Hold down programme button # and press
START button ` until :... is indicated on the
digital display.
4Release both buttons.
The LED for button # flashes and the digital
display h displays the factory setting :‹….
5Press programme button # until the factory set
value :‹‹ is indicated on the digital
display h.
To change the setting:
1By pressing the 3 button, you can switch the
hot water setting off :‹‹ or on :‹‚.
2Press START button `.
The set value is saved.
3Close the door.
Electrical connection
Connect the appliance to an alternating current
only, ranging from 220 V to 240 V and 50
Hz or 60 Hz via a correctly installed socket with
protective earth conductor. See rating plate
for required fusing 9J.
The socket must be near the appliance and freely
accessible following installation.
If the plug is not freely accessible, an allpole
disconnector with a contact opening of at least 3
mm must be fitted on the installation side
to satisfy the relevant safety instructions.
The connection may be modified by technicians
only.
A power cord extension may be purchased from
customer service only.
Use only a residual current operated circuit-
breaker which features the symbol . Only this
extension guarantees compliance with
the currently valid regulations.
The appliance features a water damage
protection system. Please note the system will not
function unless the power supply is connected.
Removing the appliance
Also observe the sequence of worksteps here.
1Disconnect the appliance from the power supply.
2Turn off the water supply.
3Undo the waste water and drinking water
connection.
4Loosen fastening screws for the furniture parts.
5If fitted, remove the base panel.
6Pull out the appliance, carefully pulling the hose
behind.
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gaggenau DF250141 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info