Bedienungsanleitung Garden Touch WS400 (Seite 3 von 16) (Deutsch, Englisch, Holländisch, Französisch)

817273

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

3EN

PARTS & FEATURES OF THE DEVICE FIG. 

1. Safety switch

2. Power switch

3. Handle

4. Power cord

5. Lock nut adjuster

6. Auxiliary handle

7. Shaft

8. Angle adjusting

knob

9. Length adjusting

knob

10. Weed sweeper head

11. Guide wheel

12. Guard hood

13. Quick-grip holder

14. Metal brush

15. Nylon brush

16. Set of screws

FIRST USE

• Remove the device and accessories from the box. Remove any stickers,

protective film or plastic from the device.

• Before using the device for the first time, clean it with a damp cloth.

• Thoroughly dry the device.

• Never use aggressive or abrasive cleaning materials, a scouring sponge

or steel wool; these could damage the device.

ASSEMBLING

ADJUSTING THE MAIN HANDLE

When taking out the device of the

packaging, the main handle is

turned to the side. Turn the main

handle to the front by rotating

the angle adjusting knob (8) until

it clicks into place and the main

handle does not turn anymore.

ASSEMBLING THE AUXILIARY HANDLE

Take the auxiliary

handle (6) and loosen the

lock nut with the lock nut

adjuster (5), taking out

the pin. Place the auxiliary

handle over the mount on

the device, aligning the

openings. Place the pin

through the bigger opening

of the auxiliary handle and

secure it in place with the

lock nut adjuster and lock

nut on the other opening.

ASSEMBLING THE GUIDE WHEEL

Take the guide wheel (11)

and place its bolt into the

opening on the side of the

weed sweeper head (10).

Screw it securely in place

with a screwdriver.

ASSEMBLING THE GUARD HOOD

Take the guard hood (12) and place it on

the side of the weed sweeper head (10),

aligning the openings with each other.

Place the provided screws (16) through

the openings and secure them in place

with a screwdriver.

ASSEMBLING THE BRUSH

The device needs to be assembled with one of the provided brushes (14) &

(15). To assemble the brush push back the quick-grip holder (13) and place

the bolt of the brush into the opening. Release your hold on the quick-grip

holder and check if it is secure in place.

ADJUST THE LENGTH OF THE SHAFT

The length of the shaft is adjustable in dierent heights.

• Loosen the lower half of the length adjusting knob (9) by turning it

anti-clockwise.

• Pull the lower shaft (7) up or down to adjust the desired height.

• Tighten the length adjusting knob (9) by turning counter clockwise.

ADJUSTING THE AUXILIARY HANDLE

The auxiliary handle is adjustable in dierent angles.

• Loosen the lock nut adjuster (5) on the side of the auxiliary handle (6)

until you can move the angle of the auxiliary handle.

• Rotate the auxiliary handle in the desired position.

• Tighten the lock nut securely with the lock nut adjuster.

POWERING THE DEVICE

• Make sure the power plug is connected to the mains power. To power ON

the device, push the safety switch (1) upwards, hold it in place and press

the power switch (2). You can let go of the safety switch when the device

is powered on.

• To power OFF the device, let go of the power switch (2). Make sure the

brushes stopped turning and remove the power plug from the mains

power.

Note! The brush will keep turning for a few seconds when the device is

powered o.

OPERATING THE DEVICE

The device is designed to clean accumulated dirt, moss and weeds from

paving and pathways. Clean and maintain the device after every use (see

“Cleaning and maintenance”).

Note! Do not carry the device by the power switch when not in use.

 CLEANING AND MAINTENANCE

• Clean the device regularly.

• Switch the device off, make sure the brushes stopped turning and remove

the power plug from the mains power.

• Never immerse the device in water or any other liquid.

• Clean the device with a dry cloth, use a brush for areas that are hard to

reach. If the device is extremely dirty, clean with a damp cloth and then

dry thoroughly.

• Check the air inlet and outlet of the device for dust and dirt. Remove dust

and dirt carefully by vacuuming (vacuum cleaner).

• Clean the brushes (14) & (15) after every use.

• Keep the cutting edges of the brushes (14) & (15) sharp for optimal

performance and to reduce the risk of injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garden Touch WS400 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info