Bedienungsanleitung Gardena TCS Li-18-20 Art. 8866 (Seite 3 von 18) (Englisch)

711903

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

General Power Tool Safety Warnings

WARNING ! Read all safety warnings and

all instructions.

Failure to follow the warnings and instructions

may result in electric shock, fire and / orserious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains operated (corded) power tool or battery-operated

(cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable

liquids, gases or dust. EPower tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause you

to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adaptor

plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk

of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase

the risk electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk

of electric shock.

If operating a power tool in a damp location is una-

voidable, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not operate power tools if you are tired or ill or if

you are under the influence of drugs, alcohol or

medication. A moment of inattention while operating

power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Personal protective equipment can

be purchased from specialist traders.

Protective equipment such as dust mask, non-skid

safety shoes, hard had, or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and / or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch on

invites accidents.

Remove any adjusting key or wrench before turn ing

the power tool on. A wrench or a key left attached to a

rotating part of the power tools may result in personal injury.

e) Do not overreach. In order to prevent overtired-

ness, alternate working positions and ensure suf-

ficient breaks are taken. Keep proper footing and

balance at all times. This enables better control of the

power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used.

Use of dust collection can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct power

tool will do the job better and safer at the rate for which

it was designed.

Explanation of Symbols on your product.

WARNING!

Read the user instructions carefully

to make sure you understand all the

controls and what they do.

Risk of fatal injury due to electric shock!

Keep at least 10 m away from electricity

lines.

Always wear protective gloves.

Always wear non-slip safety shoes.

Always wear a hard hat.

Always wear eye and ear protection.

Do not expose to rain.

Do not leave the product outdoors

while it is raining.

Direction of movement of

the chain.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gardena TCS Li-18-20 Art. 8866 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gardena TCS Li-18-20 Art. 8866

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info