Bedienungsanleitung Gardena TCS Li-18-20 Art. 8866 (Seite 4 von 18) (Englisch)

711903

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

b) Do not use the power tool if the switch does not

turn it on and off.

Any power tool that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power source and /

or the battery pack from the power tool before

making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools.

Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may

affect the power tool’s operation. If damaged, have

the power tool repaired before use.

Many accidents are caused by poorly maintained power

tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger specified by the

manufacturer.

A charger that is suitable for one type of battery pack

may create a risk of fire when used with another battery

pack.

b) Use power tools only with specifically designated

battery packs.

Use of any other battery packs may create a risk of injury

and fire.

c) When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acciden-

tally occurs, flush with water. If liquid contacts eyes,

additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

6) Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

Pole Pruner – safety instructions:

• Always ensure that body parts are kept clear of the

chain area. Do not remove the cut material or hold

the material that is to be cut when the blades are

turning. Only remove blocked material when the

device is switched off.

One moment of negligence when handling the Pole

Pruner can cause severe injuries.

• Always carry the Pole Pruner at its handle, and only

when the chain is not moving. During transport or

whilst storing the Pole Pruner, the bar cover must be

applied. Proper use of the Pole Pruner reduces the risk

of injuries by the chain.

• Hold the power tool by the insulated handle

surfaces as the chain may come into contact with

hidden power cables.

The contact of the bar with a “live” wire may energize

metal parts of the device and lead to electric shock.

Additional Safety Recommendations

Work area safety

Only use the Pole Pruner as intended.

The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Pay special attention to the hazard for third parties

posed by the increased working radius when the

telescopic tube is extended.

Warning! When wearing hearing protection, and due to

the noise produced by the product, the operator may

not notice persons approaching.

Warning! This unit makes an electromagnetic field

while it operates. This field may under some con ditions

interfere with active or passive medical implants.

To decrease the risk of conditions that can possibly

injure or kill, we recommend persons with medical

implants to speak with their physician and the medical

implant manufacturer before operating.

Do not use the product when a thunderstorm is

approaching.

Electrical safety

Only connect charger to the AC voltage specified on the

rating plate.

Under no circumstances should an earth be connected

to any part of the product.

Personal safety

Always wear suitable clothing, gloves, and stout

shoes.

Thoroughly inspect the areas where the Pole Pruner is

to be used and remove all wires, hidden electric cables

and other foreign objects.

All adjustments (tilting the cutting head, adjusting the

length of the telescopic tube) must be made with the

protective cover applied and the Pole Pruner must not

be supported by the blade whilst doing so.

Before using the machine and after any impact, check

for signs of wear or damage. Have repairs carried out as

and when required.

Never attempt to work with an incomplete Pole

Pruner or one that has been subjected to unauthorised

modifications.

Power tool use and care

You should know how to switch off the device in the

event of an emergency.

Never hold the Pole Pruner at the protective cover.

Do not use the Pole Pruner when its safety devices are

damaged.

Do not use a ladder when using the Pole Pruner.

Gardena TCS Li-18-20 Art. 8866 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gardena TCS Li-18-20 Art. 8866

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info