Bedienungsanleitung Gardenline EBV245A (Seite 9 von 19) (Englisch)

724645

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

24.5cc 4 Stroke Petrol Blower Vacuum

AFTER SALES SUPPORT

e-mail: help@powertoolsupport.com

1800 909 909

MODEL: №. EBV245A • 08/2018 • 52754

(toll free)

AFTER SALES SUPPORT

(toll free)

24.5cc 4 Stroke Petrol Blower Vacuum

e-mail: help@powertoolsupport.com1800 909 909

MODEL: №. EBV245A • 08/2018 • 52754

14 15

Preparation of the Blower Vacuum prior to use

The petrol blower vacuum requires some assembly prior to use. This includes

joining of the vacuum tubes, joining of the blower tubes, and depending if

the tool is to be used for blowing or vacuuming, tting of the tube assembly

to the housing and tting the collection bag assembly to the housing.

Setting up for use as a Blower

IMPORTANT. Blower tube installation aects both blower balance and

performance.

WARNING. Danger from rotating impeller!

Stop the engine before installing or removing the blower tubes.

Never perform any maintenance or assembly procedures on this

machine while the engine is running.

Attaching the Blower Tube

1. Place the blower upright on the ground or on a sturdy work surface (Fig A).

2. Push the blower tube nozzle tube (6) over the upper blow tube (5), lining

up both the arrows on the each tube and lining up the protruding locking

pin/s on the end of the upper blow tube (5) with the protruding channel/s

on the blow tube nozzle (6) (Fig B).

NOTE: You may need to loosen the screw from the blow tube nozzle (6) so

the screw sits ush otherwise the tubes will not connect properly due to the

screw impeding the connection. This is a non-removable screw.

3. Rotate the blow tube nozzle (6) clockwise on the upper blow tube (5)

locking it into place. Then using the spark plug spanner / combination

screwdriver (25),screw in the assembly screw until secure.

4. Loosen the screw (with 2 small washers) from the

discharge port (24), using the supplied spark plug

spanner / combination screwdriver (25). Align and

push the assembled blower tube assembly over the

discharge port (24) on the blower outlet lining up

the arrow on the discharge port with arrow on the

tube and then rotate clockwise until it locks in place

and the screw hole can be seen (Fig C).

5. Using the supplied spark plug spanner /

combination screwdriver (25), screw in the

assembly screw + 2 small washers until secure

(Fig D).

Check the intake cover (8). For use of the blower

vacuum as a blower, the vacuum tubes should

not be tted, but the intake cover MUST be

closed and secured (Fig E).

The blower vacuum is now ready for use as a

blower.

NOTE: The vacuum tubes (9/11) and the

collection bag (10) are not required for the

blower operation.

Setting up for use as a Vacuum

Assembly of the Vacuum tubes

1. Align the upper vacuum tube (9) and the

vacuum tube nozzle (11) so that the protruding

pins on the upper vacuum tube (9) align with the

protruding channels on the vacuum tube nozzle

(11).

NOTE: You may need to loosen the screw from

the vacuum tube nozzle (11) so the screw sits

ush otherwise the tubes will not connect

properly due to the screw impeding the

connection.

2. Slide the upper vacuum tube (9) inside the

vacuum tube nozzle (11) until it will enter no

more, then rotate the vacuum tube nozzle (11 in

an anti clockwise direction until securely locked

together (Fig F). This is a non-removable screw.

3. Using the supplied spark plug spanner /

combination screwdriver (25), secure in the

assembly screw and rotate in a clock wise

direction until secure (Fig G).

TIGHTEN

Assembly Assembly

Assembly

LOCK IN PLACE

C.A. B.

LOCK IN PLACE LOCK IN PLACE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gardenline EBV245A Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info