724644
16
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
47.1cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 61705 • 08/2018 • FCS4800A
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
47.1cc Petrol Chainsaw
MODEL: №. 61705 • 08/2018 • FCS4800A
28 29
4. Check for oil on the electrodes and clean o any excess.
5. Use a soft wire brush to clean up carbon build up on spark plug
electrodes.
Replace the spark plug or reset the electrode gap to 0.6-0.7mm.
Replacement spark plugs can be purchased from your local Lawnmower
or small engine store, or from https://help.tools/
Chain Sharpening
WARNING: Always ensure the engine is turned o before
undertaking this task.
Sharpen the chain regularly to maintain optimum performance of the
chainsaw.
Signs of a dull chain are:
The sawdust becomes powder-like
Extra force is required to execute a cut
The cut does not track in a straight line
Increased vibration
Increased fuel consumption
WARNING: Wear heavy gloves when handling the chain.
Hold the guide bar (19) securely in a vice.
Sharpen each cutter using the supplied
sharpening le (34). Always use outward strokes.
(Fig AP)
After sharpening, the cutters must all have the
same width and length. After every 3 - 4 times use
a repair centre to professionally sharpen your saw
chain. They have the special tools necessary to
ensure the correct cutting angles and depths
are even.
Guide Bar Wear
Reverse the guide bar (19) every 8 working hours to ensure uniform wear.
Check the bar rails frequently and if necessary remove burrs and square-up
the rails using a at le.
A P.
NOTE: This product is not suitable for repair or maintenance work by the
unskilled person. The following detail explains how the product is cleaned, and
basic maintenance / safety checks.
All other maintenance work must be carried out by service agents who are
experienced with both the mechanical and electrical aspects of this product.
NOTE: Before cleaning your chainsaw or carrying out any maintenance
procedures, make sure that the engine is o and is cool.
NOTE: Failure to maintain the following parts may result in reduced engine
performance.
Disconnect the spark plug (17) to prevent accidental starting. Maintenance
should be performed before and after each use. If the chainsaw is dropped
or appears to suer any other signicant impact, it is highly recommended to
perform all maintenance tasks before operation, and if there appears to be an
issue, refer to the troubleshooting chart, or take to an authorised service agent.
Changing/replacing the Spark Plug
Regularly check the spark plug (17) for wear and any build-up of carbon on the
electrodes. Spark plugs should be replaced every 10-15 hours of use.
1. Remove the air lter cover (15) by rotating the air lter knob (16) in an anti-
clockwise direction, and removing the air lter cover (15). (FigAM).
WARNING: To avoid damage to the spark plug lead, ensure you hold
the rubber cap and not by the lead itself.
2. Remove / pull o the black rubber spark plug cover (17) cap from the spark
plug (Fig AN).
3. To remove spark plug (17) use the supplied combination tool (Spark Plug
Spanner / Bar Nut Tube Spanner/ Flat Blade Screwdriver) (32) and turn in an
anti-clockwise direction to remove (Fig AO).
Maintenance Chain sharpening
AM. AN. AO.
Maintenance
LOOSEN
TIGHTEN
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gardenline FCS4800A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info