Bedienungsanleitung Gardenline XKJ1109 (Seite 11 von 21) (Englisch)

724631

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

1100W Garden Pump

AFTER SALES SUPPORT

e-mail: info.aldi@positecgroup.com

1300 889 028

MODEL: №. XKJ-1109PE • 1/2019 • 44268

(toll free)

AFTER SALES SUPPORT

(toll free)

1100W Garden Pump

e-mail: info.aldi@positecgroup.com1300 889 028

MODEL: №. XKJ-1109PE • 1/2019 • 44268

18 19

3/4” BSP

Elbow Adaptor* Fitting

3/4” BSP threaded

outlet adaptor

(11) (supplied)

Elbow Adaptor*

3/4” BSP

Fitting

3/4” BSP threaded

outlet adaptor

(11) (supplied)

O Ring

Adaptors, reducing nipples and elbows

are all available from most hardware /

plumbing stores and starting o with a

¾” BSP male tting will get you started.

The following is a guide for the

use of the adaptor.

• Remove the protective cover on the

thread of the outlet of the pump.

• Making sure the “O” ring is tted to the

shoulder of the outlet tting adaptor,

thread the tting into the outlet of the

pump sucient to compress the “O”

ring rmly (Fig N).

NOTE: Teon tape is NOT required

on the thread of the adaptor into the

pump.

You now need to determine if your

plumbing requirements are ¾“ BSP

or larger.

ALSO NOTE: Teon tape (13) (not

supplied) should be applied to all other

threaded connections on the outlet side

of the adaptor provided.

Using the adaptor with

additional ttings.

Using with pipe work at ¾” BSP. For the ¾“

BSP adaptor outlet, you need to purchase

a ¾” BSP male tting, being either an

elbow or straight nipple so as to enter the

adaptor. The other end of the tting you

purchase will need to match the threaded

pipe you are connecting to (Fig O).

OR you may use a tting to connect

directly to a poly pipe in a horizontal

position (Fig P).

Pressure line connection.

IMPORTANT: ONLY use either of the two adaptors (10 & 11) supplied with

the pump for a pressure line connection.

DO NOT purchase any other tting and attempt to screw directly into the

pump.

Other purchased ttings can ONLY be screwed directly into the 3/4” BSP

threaded outlet adaptor (11) provided.

1. The pressure line* (should be at least 19mm (3/4”)) must be connected

to the pump’s pressure outlet (5) either directly or via a threaded nipple

using the supplied adaptors only.

2. The 19mm straight hose outlet adaptor (10) will accept a 19mm hose. The

threaded 3/4” BSP 20mm threaded outlet adaptor (11) will accept pipe

ttings with a 3/4” BSP (20 mm) thread, either for hard plumbing or hose

applications.

3. A 13 mm (1/2”) pressure hose* can also be used with the appropriate

screw connections, but thiswill only reduce the ow rate.

Fitting and using the supplied 3/4” BSP threaded outlet

adaptor (11).

This tting is used to connect the output of the pump to various hard

plumbed threaded applications or hose tting applications.

The outlet of the adaptor is ¾” BSP. Many variations of threads and ttings

can be purchased from your local hardware / plumbing store to suit the

application required.

* Additional ttings as shown in pictures are NOT supplied with this garden pump.* Additional ttings as shown in pictures are NOT supplied with this garden pump.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gardenline XKJ1109 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info