Bedienungsanleitung Garmin BabyCam (Seite 9 von 10) (Englisch)

629013

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Alignment: Displays the

babyCam video to help you align the

camera.

Check Seat Reminder: Enables a reminder to check for rear

seat passengers before exiting the vehicle.

Unpair: Removes the paired camera.

Rename: Allows you to rename the paired camera.

Flipping and Mirroring the Video

Depending on the camera orientation, the video on your

navigation device may appear upside down or mirrored by

default. You can flip the video vertically or mirror the video

horizontally to correct the video.

Select Settings > babyCam.

Select a camera from the list.

Select

Flip Video, and select an option.

Check Seat Reminder

The check seat reminder plays a tone and displays a message

to remind you to check your vehicle for passengers before

exiting. If you viewed the

babyCam video during your drive, the

most recent image from the camera also appears.

Device Maintenance

Updating the Camera Software

When you update your navigation device, the latest camera

software is included in the update. The next time you connect

your navigation device to the receiver cable, it updates your

camera software wirelessly when a camera software update is

available.

Update your navigation device to the latest software.

Go to garmin.com/express or see your navigation device

owner's manual for information about updating your

navigation device.

Verify the camera batteries are installed or the camera is

connected to external power.

Connect the updated navigation device to the receiver cable,

and plug the receiver cable into an active vehicle power

outlet.

If a camera update is available, the navigation device sends the

update to your camera, and a progress indicator appears on the

navigation device.

Cleaning the Device

NOTICE

Do not use a dry cloth to clean the lens. Use of a dry cloth may

damage the lens.

Avoid chemical cleaners and solvents that can damage plastic

components.

Wipe the outer casing and lens with a soft, non-scratch cloth

dampened with water or alcohol.

Wipe the outer casing dry, and allow the lens to air dry.

Device Information

Specifications

Camera input voltage From 4.75 to 5.25 Vdc

Battery type Two AA batteries (NiMH, alkaline, or

lithium)

Camera temperature range From -20° to 70°C (from -4° to 158°F)

Receiver cable temperature

range

From -20° to 70°C (from -4° to 158°F)

Receiver cable input voltage From 10 to 24 V

Receiver cable fuse 2 A, 250 V fast-blow

Troubleshooting

My navigation device does not show video

from my camera

• Replace the batteries in the camera (Installing AA Batteries,

page 1)

• Manually pair the camera and receiver cable (Pairing a

Garmin babyCam

Camera with the Receiver Cable, page

• If you are using the optional vehicle power cable, verify the

vehicle power outlet is providing power.

The LED on the vehicle power cable plug illuminates when it

is receiving power.

My camera does not stay in position

• Verify the knob, thumbscrews, and threaded ring are fully

tightened.

• Verify the thumbscrew that secures the joint between the

mount and the camera is installed in the correct direction, as

shown in the installation illustrations.

When it is installed correctly, the thumbscrew grip is on the

opposite side of the mount from the threaded hole.

When should I replace the batteries?

The batteries can last 3 to 12 months with daily use. The battery

life depends on several factors, including the power setting

(

babyCam Settings, page 4)

, the type of batteries used, and the

ambient temperature.

A low battery power alert appears on your navigation device

when the camera batteries are low. You can also use these

options to verify manually whether the batteries are providing

power.

• Check the batteries using an external battery tester.

• Remove the batteries from the camera, wait several seconds,

and reinstall them in the camera.

The red power LED illuminates for about two seconds if the

camera receives adequate power from the batteries. If the

LED does not illuminate, or if it turns off in less than one

second, you should change the batteries.

I cannot tell whether the camera is on or off

The device is on while it is receiving power from either the

batteries or the optional vehicle power cable accessory. You

cannot turn off the device.

• To conserve power, the power LED on the device is not

illuminated during normal use.

• When you install batteries or connect the vehicle power

cable, the red power LED illuminates briefly to indicate the

camera is receiving power.

Device Maintenance 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin BabyCam Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin BabyCam

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info