Bedienungsanleitung Garmin BabyCam (Seite 8 von 10) (Englisch)

629013

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

The receiver cable and camera are paired at the factory and

connect automatically. You can pair a camera manually with the

receiver cable to add cameras or troubleshoot connection

problems.

NOTE:

The receiver cable includes a traffic receiver. If your

navigation device has a traffic data subscription, the traffic

features continue to function while using this cable.

Installing the Receiver Cable

Before you can install the receiver cable, you must update your

compatible navigation device to the most recent software

version. Your navigation device may not be compatible with the

receiver cable without the most recent software. See your

navigation device owner's manual or go to garmin.com/express

for more information about updating the software.

The

BC30 receiver cable is included in the box with your

babyCam camera.

Plug the small end of the receiver cable into the mini-USB

port on your navigation device or your navigation device

mount.

See the owner's manual for your navigation device for more

information about connecting the navigation device to vehicle

power.

Plug the large end of the receiver cable into a vehicle power

outlet.

Connecting the Optional Vehicle Power

Cable

CAUTION

Always remove the non-rechargeable batteries from the device

before connecting it to an external power source. Although the

device is designed to keep the batteries completely isolated, an

internal part failure may result in thermal or chemical discharge

that could cause property damage or personal injury.

The optional vehicle power cable accessory allows you to power

your camera using a vehicle power outlet instead of batteries.

Go to garmin.com/babycam to purchase accessories.

Remove the batteries from your camera.

Plug the small end of the vehicle power cable

into the mini-

USB port

on the camera .

Plug the other end of the vehicle power cable into a vehicle

power outlet.

Viewing babyCam Video

Before you can view video from the camera, you must provide

power to the camera and connect the receiver cable to your

navigation device and to vehicle power.

You can view live video from the babyCam camera on your

compatible Garmin navigation device.

On the navigation device, select .

appears when you view the main menu or the map.

The video appears on the navigation device screen for

several seconds. The device returns to the previous page

automatically after the camera timeout elapses.

Select to return to the previous page manually (optional).

Viewing babyCam Video Using Voice

Commands

NOTE:

This feature is available only for navigation device

models that support voice command features for the selected

device language.

You can show or hide the

babyCam video using voice

commands. This allows you to view your passenger without

reaching for the navigation device.

• To view the babyCam video, from any page, say Show

Video.

• To hide the babyCam video, say

Hide Video.

Multiple Cameras

You can pair a maximum of four compatible Garmin

wireless

cameras with the receiver cable, including Garmin babyCam

™

cameras and Garmin universal wireless backup cameras. For

example, you can pair two Garmin babyCam cameras for two

passengers, a backup camera installed on your vehicle, and a

second backup camera installed on a trailer. From the camera

view, you can switch between the video feeds from all paired

cameras.

If your camera and receiver cable were packaged together, they

come paired from the factory. If the camera and receiver cable

are properly installed and you are not receiving video on your

navigation device, you can pair the camera and the receiver

cable again manually.

Pairing a Garmin babyCam Camera with the

Receiver Cable

Select an option to verify the camera is not receiving power:

• Remove the batteries from the camera.

• Disconnect the vehicle power cable accessory from the

camera.

Turn on the navigation device connected to the receiver

cable.

From the navigation device, select Settings > babyCam >

Add New Camera.

Follow the on-screen instructions.

Switching Cameras

You can cycle through the video feeds from all paired cameras.

From the camera view, select

The video feed from the next camera appears, and the

camera name appears at the top of the screen.

Customizing the Device

babyCam Settings

The

babyCam settings allow you to manage paired Garmin

babyCam cameras and camera settings. This menu appears on

your navigation device only when the device is connected to a

wireless camera receiver cable. Go to

garmin.com/babycam to

purchase a Garmin babyCam camera.

Select Settings

> babyCam

, and select a paired camera.

Power Settings: Allows you to set the amount of time the video

appears on the screen.

Flip Video: Allows you to flip or mirror the video.

4 Viewing

babyCam Video

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin BabyCam Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin BabyCam

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info