Bedienungsanleitung Garmin D2 Pilot (Seite 10 von 24) (Englisch)

563575

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Compass

The device has a 3-axis compass with automatic calibration.

The compass features and appearance change depending on

the profile you are using (Changing Profiles), whether GPS is

enabled, and whether you are navigating to a destination. You

can also manually change the compass settings (Compass

Settings).

Navigating with the Horizontal Situation Indicator

1While navigating, from the time of day page, select .

ÀCourse line pointer. Indicates the direction of the desired course

line from your starting point to your next waypoint.

ÁBearing indicator. Indicates the bearing to your next waypoint.

ÂTo-and-from indicator. Indicates whether you are headed to or

from the waypoint.

ÃCourse deviation indicator (CDI). Indicates the location of the

desired course line in relation to your location.

ÄCourse deviation distance. The dots indicate your distance off

course.

TIP: You can select the action key to adjust the scale.

2Change your direction until the bearing indicator is aligned

with the painted mark at the top of watch bezel to move

toward your next waypoint.

TIP: If the to-and-from indicator points opposite the course

line pointer, you are moving away from your next waypoint.

3Continue toward your next waypoint.

The course deviation indicator moves toward the course line

pointer. When the course deviation indicator is fully aligned

with the course line pointer, you are on the selected course

to your next waypoint.

Calibrating the Compass

NOTICE

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

1Select the action key.

2Select Setup > Sensors > Compass > Calibrate > Start.

3Follow the on-screen instructions.

Map

represents your location on the map. As you travel, the icon

moves and leaves a track log (trail). Waypoint names and

symbols appear on the map. When you are navigating to a

destination, your route is marked with a line on the map.

• Map navigation (Browsing the Map)

• Map settings (Map Settings)

Browsing the Map

1While navigating, select to view the map.

2Select the action key.

3Select an option:

• To pan up or down, select Pan, and select or .

• To pan right or left, select Pan > , and select or .

• To navigate to a saved location, select Pan, select the

action key, and select Select Pt..

• To zoom in or out, select Zoom, and select or .

Navigating Using TracBack®

While navigating, you can navigate back to the beginning of

your track. This can be helpful when finding your way back to

camp or the trail head.

1Select the action key.

2Select Tracks > Current > TracBack.

Your current location À, track to follow Á, and end point Â

appear on the map.

Altimeter and Barometer

The device contains an internal altimeter and barometer.

• On Demand sensor data (Viewing the Data Pages)

• Always On sensor data (Turning on a Sensor Mode)

• Altimeter settings (Altimeter Settings)

• Altimeter and barometric readings (Altimeter and Barometric

Readings)

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometric altimeter if

you know the correct elevation or the correct sea level pressure.

1Select the action key.

2Select Setup > Sensors > Altimeter.

3Select an option:

• Select Auto Cal. > At Start to calibrate automatically from

your GPS starting point.

• Select Auto Cal. > Continuous to calibrate automatically

with periodic GPS calibration updates.

• Select Calibrate to enter the current elevation or sea-

level pressure.

Tracking Weather Changes Overnight

You can use your device to track changes in barometric

pressure over time. Increases in barometric pressure usually

indicate good weather, and decreases in barometric pressure

usually indicate bad weather.

1Select the action key.

2Select Setup > Sensors > Mode > Always On.

3Select repeatedly to return to the time of day page.

4Select repeatedly until the barometric data page appears.

The current barometric pressure appears in large numbers,

and the range of previous readings for the graph shown

appears in small numbers at the bottom of the page.

5Compare the current reading with earlier readings to see if

the barometric pressure is increasing or decreasing.

6 Navigation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin D2 Pilot Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin D2 Pilot

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info