Bedienungsanleitung Garmin D2 Pilot (Seite 12 von 24) (Englisch)

563575

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

4Complete one or more actions to enter your jump

information:

• Select DIP to set a waypoint for the desired landing

location.

• Select Drop Alt to set the drop altitude AGL (in feet)

when the jumpmaster exits the aircraft.

• Select Open Alt to set the open altitude AGL (in feet)

when the jumpmaster opens the parachute.

• Select FWD Throw to set the horizontal distance traveled

(in meters) due to aircraft speed.

• Select Crs to HARP to set the direction traveled (in

degrees) due to aircraft speed.

• Select Wind to set the wind speed (in knots) and direction

(in degrees).

• Select Constant to fine-tune some information for the

planned jump. Depending on the jump type, you can

select Percent Max, Safety Fctr, K-Open, K-Freefall, or

K-Static and enter additional information (Constant

Settings).

• Select Auto to DIP to enable navigation to the DIP

automatically after you jump.

• Select GOTO HARP to start navigation to the HARP.

Entering Wind Information for HAHO and HALO

Jumps

1Select the action key.

2Select Jumpmaster.

3Select a jump type (Jump Types).

4Select Wind > Add.

5Select an altitude.

6Enter a wind speed in knots and select Done.

7Enter a wind direction in degrees and select Done.

The wind value is added to the list. Only wind values

included in the list are used in calculations.

8Repeat steps 5–7 for each available altitude.

Resetting Wind Information

1Select the action key.

2Select Jumpmaster.

3Select HAHO or HALO.

4Select Wind > Reset.

All wind values are removed from the list.

Entering Wind Information for a Static Jump

1Select the action key.

2Select Jumpmaster > Static > Wind.

3Enter a wind speed in knots and select Done.

4Enter a wind direction in degrees and select Done.

Constant Settings

Select Jumpmaster, select a jump type, and select Constant.

Percent Max: Sets the jump range for all jump types. A setting

less than 100% decreases the drift distance to the DIP, and

a setting greater than 100% increases the drift distance.

More experienced jumpmasters may want to use smaller

numbers, and less experienced skydivers may want to use

larger numbers.

Safety Fctr: Sets the margin of error for a jump (HAHO only).

Safety factors are usually integer values of two or greater,

and are determined by the jumpmaster based on

specifications for the jump.

K-Freefall: Sets the wind drag value for a parachute during

freefall, based on the parachute canopy rating (HALO only).

Each parachute should be labeled with a K value.

K-Open: Sets the wind drag value for an open parachute,

based on the parachute canopy rating (HAHO and HALO).

Each parachute should be labeled with a K value.

K-Static: Sets the wind drag value for a parachute during a

static jump, based on the parachute canopy rating (Static

only). Each parachute should be labeled with a K value.

VIRB™ Remote

The VIRB remote function allows you to control your VIRB

action camera from a distance. Go to www.garmin.com/VIRB to

purchase a VIRB action camera.

Controlling a VIRB Action Camera

Before you can use the VIRB remote function on your device,

you must enable the remote setting on your VIRB camera. See

the owner's manual for your VIRB camera for more information.

1Turn on your VIRB camera.

2From your device, select the action key, and select VIRB

Remote.

3Wait while the device connects to your VIRB camera.

4Select an option:

• To record video, select .

• To stop recording video, select .

• To take a photo, select the action key.

Clock

Setting the Alarm

1Select the action key.

2Select Clock > Alarm Clock > Add Alarm.

3Select the action key, , and to set the time.

4Select Tone, Vibration, or Tone & Vib..

5Select Once, Daily, or Weekdays.

Starting the Countdown Timer

1Select the action key.

2Select Clock > Timer.

3Select the action key, , and to set the time.

4If necessary, select Notification, and select a type of

notification.

5Select Start.

Using the Stopwatch

1Select the action key.

2Select Clock > Stopwatch.

3Select Start.

Adding a Custom Time Zone

1Select the action key.

2Select Clock > Alt. Zones > Add Zone.

3Select a time zone.

The custom time zone page is added to the current profile.

Editing a Custom Time Zone

1Select the action key.

2Select Clock > Alt. Zones.

3Select a time zone.

4Select an option:

• To change the time zone, select Edit Zone.

• To customize the name of the time zone, select Edit

Label.

• To delete the time zone from the quick page loop, select

Delete > Yes.

8 Applications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin D2 Pilot Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin D2 Pilot

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info