Bedienungsanleitung Garmin D2 Pilot (Seite 13 von 24) (Englisch)

563575

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Alerts

You can set the device to alert you in many different situations

where your awareness of the surrounding conditions or other

data is important. There are three types of alerts: event alerts,

range alerts, and recurring alerts.

Event alert: An event alert notifies you once. The event is a

specific value. For example, you can set the device to alert

you when you reach a specified elevation.

Range alert: A range alert notifies you any time the device is

above or below a specified range of values. For example,

you can set the device to alert you when your heart rate is

below 60 beats per minute (bpm) and over 210 bpm.

Recurring alert: A recurring alert notifies you every time the

device records a specified value or interval. For example,

you can set the device to alert you every 30 minutes.

Alert Name Alert Type Description

Proximity Recurring See Setting a Proximity Alarm.

Distance Event,

recurring

You can set an interval or a custom

distance from your final destination.

Time Event,

recurring

You can set an interval or a custom time

from your estimated time of arrival.

Elevation Event, range,

recurring

You can set minimum and maximum

elevation values. You can also set the

device to alert you when you ascend or

descend a specified amount.

Nav. Arrival Event You can set alerts for reaching waypoints

and the final destination of a track or

route.

Speed Range You can set minimum and maximum

speed values.

Pace Range You can set minimum and maximum pace

values.

Heart Rate Range You can set minimum and maximum heart

rate values or select zone changes. See

About Heart Rate Zones and Heart Rate

Zone Calculations.

Cadence Range You can set minimum and maximum

cadence values.

Battery Event You can set a low battery power alert.

Setting a Proximity Alarm

Proximity alarms alert you when you are within a specified

range of a particular location.

1Select the action key.

2Select Alerts > Proximity > Edit > Create New.

3Select a location.

4Enter a radius.

5Select Done.

Calculating the Size of an Area

Before you can calculate the size of an area, you must acquire

satellites.

1Select the action key.

2Select GPS Tools > Area Calc..

3Walk around the perimeter of the area.

4When you are finished, select the action key to calculate the

area.

5Select an option:

• Select Save Track, enter a name, and select Done.

• Select Change Units to convert the area to a different

unit.

• Select to exit without saving.

Viewing the Almanacs

You can view almanac information for the sun and moon, and

hunting and fishing.

1Select the action key.

2Select an option:

• To view the sunrise, sunset, moonrise, and moonset

information, select GPS Tools > Sun & Moon.

• To view the predicted best times for hunting and fishing,

select GPS Tools > Hunt & Fish.

3If necessary, select or to view a different day.

Viewing Satellite Information

The satellite page shows your current location, GPS accuracy,

satellite locations, and signal strength.

1Select the action key.

2Select Start GPS.

3Select the action key.

4Select GPS Tools > Satellite.

5Select to view additional information.

Simulating a Location

When you are planning routes or activities in a different area,

you can turn off GPS and simulate a different location.

1Select the action key.

2Select Setup > System > GPS Mode > Demo Mode.

3Select a location.

4Select Go > Move to Location.

Customizing Your Device

Setup Overview

The Setup menu contains many ways to customize your device.

Garmin recommends that you familiarize yourself with the

settings for each feature. If you customize your settings before

your activity, you will spend less time adjusting the watch during

your activity. To open the Setup menu, select the action key,

and select Setup.

NOTE: All changes you make are saved to the active profile

(Changing Profiles).

Setup Item Available Settings and Information

System You can customize GPS settings, arrow keys, and the

device language (System Settings).

Data Pages You can customize data pages and data fields

(Customizing the Data Pages).

Sensors You can customize the compass (Compass Settings)

and altimeter (Altimeter Settings) settings.

ANT Sensor You can set up wireless accessories such as the heart

rate monitor or tempe™ (ANT+ Sensors).

Tones You can customize the tones and vibrations (Setting the

Device Tones).

Display You can adjust the backlight and screen contrast

(Display Settings).

Reset You can clear the trip data, sensor plots (Clearing All

Sensor Plot Data), waypoints, or track log, or you can

reset all of your settings (Resetting the Profile to Factory

Settings).

Map You can customize the map orientation and how items

appear on the map (Map Settings).

Tracks You can customize the track recording settings (Track

Settings).

Time You can customize the appearance of the time page

(Time Settings).

Customizing Your Device 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin D2 Pilot Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin D2 Pilot

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info