Bedienungsanleitung Garmin Descent G1 (Seite 82 von 134) (Englisch)

801440

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

Pairing Your Wireless Sensors

The first time you connect a wireless sensor to your watch using ANT+ or Bluetooth technology, you must pair

the watch and sensor. If the sensor has both ANT+ and Bluetooth technology, Garmin recommends that you

pair using ANT+ technology. After they are paired, the watch connects to the sensor automatically when you

start an activity and the sensor is active and within range.

1If you are pairing a heart rate monitor, put on the heart rate monitor.

The heart rate monitor does not send or receive data until you put it on.

2Bring the watch within 3m (10ft.) of the sensor.

NOTE: Stay 10m (33ft.) away from other wireless sensors while pairing.

3Hold MENU.

4Select Sensors & Accessories > Add New.

5Select an option:

• Select Search All.

• Select your sensor type.

After the sensor is paired with your watch, the sensor status changes from Searching to Connected. Sensor

data appears in the data screen loop or a custom data field. You can customize the optional data fields

(Customizing the Data Screens, page40).

HRM-Pro Running Pace and Distance

The HRM-Pro series accessory calculates your running pace and distance based on your user profile and the

motion measured by the sensor on every stride. The heart rate monitor provides running pace and distance

when GPS is not available, such as during treadmill running. You can view your running pace and distance on

your compatible Descent watch when connected using ANT+ technology. You can also view it on compatible

third-party training apps when connected using Bluetooth technology.

The pace and distance accuracy improves with calibration.

Automatic calibration: The default setting for your watch is Auto Calibrate. The HRM-Pro series accessory

calibrates each time you run outside with it connected to your compatible Descent watch.

NOTE: Automatic calibration does not work for indoor, trail, or ultra run activity profiles (Tips for Recording

Running Pace and Distance, page74).

Manual calibration: You can select Calibrate & Save after a treadmill run with your connected HRM-Pro series

accessory (Calibrating the Treadmill Distance, page27).

Tips for Recording Running Pace and Distance

• Update your Descent watch software (Product Updates, page102).

• Complete several outdoor runs with GPS and your connected HRM-Pro series accessory. It's important that

your outdoor range of paces matches your range of paces on the treadmill.

• If your run includes sand or deep snow, go to the sensor settings, and turn off Auto Calibrate.

• If you previously connected an ANT+ foot pod, set the foot pod status to Off, or remove it from the list of

connected sensors.

• Complete a treadmill run with manual calibration (Calibrating the Treadmill Distance, page27).

• If automatic and manual calibrations don't seem accurate, go to the sensor settings, and select HRM Pace &

Distance > Reset Calibration Data.

NOTE: You can try turning off Auto Calibrate, and then manually calibrate again (Calibrating the Treadmill

Distance, page27).

74 Sensors and Accessories

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Descent G1 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Descent G1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info